restore hdd game install after ban with nand backup?

[glaze83]

C:\nandpro>findsecdata surreykid.bin -rc 5

findsecdata v0.62 2009-12-09 by boby2pc
Controller version 1
Last filetable change: 0x4A
ECC change: 0x4A Filetbl: 0x0129 Secdata: 0x0128 Timestamp: 3B751AF0 2009-11-21
ECC change: 0x49 Filetbl: 0x0127 Secdata: 0x0352 Timestamp: 3B5816BA 2009-10-24
ECC change: 0x40 Filetbl: 0x034E Secdata: 0x0369 Timestamp: 3B39B17D 2009-09-25

Checking secdata:
0352 containts not 0 values above offset 1024 or zeros below 1024 (overwritten)
0369 containts not 0 values above offset 1024 or zeros below 1024 (overwritten)

Searching for recommended

Extracting secdata:
secdata0128.bin

Extracting filetables:
filetable0129.bin

Creating patched secdata:
Patchedsecdata0128.bin

Creating patched filetables:

Use:

Old secdata.bin not found. Console might be not banned, already patched or secda
ta.bin overwritten.

Press ENTER


C:\nandpro>

Any ideas?

[dgx]

i may be wrong but when i used the

nandpro.exe lpt: -W16
nandpro.exe lpt: -w16

it worked on the 16mb nands the more updates it dont the versions that always worked 4 me on a 16mb nand wos

findsecdata v0.4 2009-11-26 by boby2pc
nandpro.exe lpt: -W16
nandpro.exe lpt: -w16

[spider2]

I can play from the hdd at 2009-12-06 then I make an iXtrem flash from 1.6 to 1.61 and after I can't use the hdd.

If You where banned 2009-12-06 then nothing You can do. Your old secdata.bin at block 248 is overwritten

this is intresting too about the nand file: http://img522.imageshack.us/img522/6121/nand.png

what do You mean ?

I mean the 2 programs show different date.
So I never can't restore my box?
Please help me! I sent my nand file in pm!

Thank You!

[boby2pc]

I mean the 2 programs show different date.
So I never can't restore my box?
Please help me! I sent my nand file in pm!

Thank You!

dgx reported one problem with 16MB nand, but I need more info from dgx to managed that.

For Your nand findsecdata showed:

nandpro lpt: -w16 Patchedsecdata00F1.bin 233 1
nandpro lpt: -w16 Patchedfiletable00DEBy0232.bin 0DE 1

then try (acoording to possible problem)

nandpro lpt: -W16 secdata00F1.bin 233 1
nandpro lpt: -w16 Patchedfiletable00DEBy0232.bin 0DE 1

if it works, please feedback.

[spider2]

[/quote]

dgx reported one problem with 16MB nand, but I need more info from dgx to managed that.

For Your nand findsecdata showed:

nandpro lpt: -w16 Patchedsecdata00F1.bin 233 1
nandpro lpt: -w16 Patchedfiletable00DEBy0232.bin 0DE 1

then try (acoording to possible problem)

nandpro lpt: -W16 secdata00F1.bin 233 1
nandpro lpt: -w16 Patchedfiletable00DEBy0232.bin 0DE 1

if it works, please feedback.


[/quote]

So I must use this all command step by step?
When I use all of them then the xbox not boot up only show the green led light and after ~15 sec 3 red light.
If I made only the last 2 command, the box boot up but then E71 error.

any suggestion?

Thank Your Help!

[boby2pc]

So I must use this all command step by step?
When I use all of them then the xbox not boot up only show the green led light and after ~15 sec 3 red light.
If I made only the last 2 command, the box boot up but then E71 error.

If second pair did't work I don't know solution for Your problem.

revert the changes by:
nandpro lpt: -W16 secdata0233.bin 233 1
nandpro lpt: -w16 filetable00DE.bin 0DE 1

[Pwnazar]

Hi there Boby, can you help me out, my 360 gave me 3 red lights with error 0110, can this be related to the nand that i modified?

Can i restore my nand from my backup to see if it works? But doing that i will loose again the functionality to install games to HD?

Thank you.

[boby2pc]

Hi there Boby, can you help me out, my 360 gave me 3 red lights with error 0110, can this be related to the nand that i modified?

Can i restore my nand from my backup to see if it works? But doing that i will loose again the functionality to install games to HD?

Thank you.

0110 is propobly hardware problem like cold solders under RAM chips, but I didn't have such problem before
and can't diagnose real problem and soultion.

[hameleonick]

D:\NandPro>FindSecData.exe nand.bin

findsecdata v0.61 2009-12-01 by boby2pc
Controller version 1
Last filetable change: 0x7E
ECC change: 0x7E Filetbl: 0x004E Secdata: 0x0124 Timestamp: 33766001 2005-11-22
ECC change: 0x76 Filetbl: 0x0123 Secdata: 0x00A4 Timestamp: 3B7448ED 2009-11-20
ECC change: 0x72 Filetbl: 0x00A3 Secdata: 0x0138 Timestamp: 33766001 2005-11-22

Checking secdata:
0138 containts not 0 values above offset 1024

Searching for recommended

Extracting secdata:
secdata0124.bin
secdata00A4.bin

Extracting filetables:
filetable004E.bin
filetable0123.bin

Creating patched secdata:
Patchedsecdata0124.bin
Patchedsecdata00A4.bin

Creating patched filetables:
Patchedfiletable004EBy004E.bin

Use:

Old secdata.bin not found. Console might be not banned, already patched or secda
ta.bin overwritten.

Press ENTER

Date of ban 2009-11-20

Boby2pc....  You helped Pwnazar, I have a similar situation (((What do you think?
Please help  PLEASEEEEE

[SamZ]

It feels like i've tried everything with no success. Could someone take a look at my nand and tell me if its a lost case? Many thanks!

[Pwnazar]

Hi there Boby, can you help me out, my 360 gave me 3 red lights with error 0110, can this be related to the nand that i modified?

Can i restore my nand from my backup to see if it works? But doing that i will loose again the functionality to install games to HD?

Thank you.

0110 is propobly hardware problem like cold solders under RAM chips, but I didn't have such problem before
and can't diagnose real problem and soultion.

Thanks Boby2pc, i will look onto it to fix this errors using infra-red heat on the memories.
Thank you again for all your suport to all of us.

[tigertron]

Hi Boby2PC,

I have tired the two suggested patch, but both does not work.

Here is the link to my Nand:
http://www.mediafire.com/file/z0j4yokgyjj/nand2.bin

D:\Backup d\NandPro\NandPro20>findsecdata nand2.bin -rc 5

findsecdata v0.4 2009-11-26 by boby2pc
Controller version 1
Last filetable change: 0xA5
ECC change: 0xA5 Filetbl: 0x01CF Secdata: 0x01CE Timestamp: 3B759C3B 2009-11-21
ECC change: 0xA4 Filetbl: 0x01CD Secdata: 0x02B4 Timestamp: 3B660689 2009-11-05
ECC change: 0xA1 Filetbl: 0x02BA Secdata: 0x02B4 Timestamp: 3B660689 2009-11-05
ECC change: 0x9C Filetbl: 0x02B3 Secdata: 0x02CC Timestamp: 3B3C101D 2009-09-24

Checking secdata:
02CC containts not 0 values above offset 1024

Searching for recommended

Extracting secdata:
secdata01CE.bin
secdata02B4.bin
secdata02B4.bin

Extracting filetables:
filetable01CF.bin
filetable01CD.bin
filetable02BA.bin

Creating patched filetables:
Patchedfiletable01CFBy01CD.bin
Patchedfiletable01CFBy02BA.bin

Use:
nandpro.exe lpt: -W16 secdata02B4.bin 1CE 1
nandpro.exe lpt: -w16 Patchedfiletable01CFBy01CD.bin 1CF 1
or
nandpro.exe lpt: -W16 secdata02B4.bin 1CE 1
nandpro.exe lpt: -w16 Patchedfiletable01CFBy02BA.bin 1CF 1

Press ENTER

[spider2]

So I must use this all command step by step?
When I use all of them then the xbox not boot up only show the green led light and after ~15 sec 3 red light.
If I made only the last 2 command, the box boot up but then E71 error.

If second pair did't work I don't know solution for Your problem.

revert the changes by:
nandpro lpt: -W16 secdata0233.bin 233 1
nandpro lpt: -w16 filetable00DE.bin 0DE 1

Hi!

Didn't work. Will be any other solution for this? Or I must forget this box? What is wrong my nand file? Cant repair the good date secdata.bin wich is maybe overwritten or change it from another same box? (zephyr)

Thank You!

[boby2pc]

hameleonick, tigertron
Yours old secdata.bin files are overwritten and nothing You can do

SamZ:
I don't know when You banned. If 12 of novermber and you didn't boot xbox without dvd since
last dump then patch will work. if booted without dvd then dump again, generate new patch and patch immidietly.
If 10 of november Your old secdata.bin is overwritten.

Last filetable change: 0x54
ECC change: 0x54 Filetbl: 0x011B Secdata: 0x0344 Timestamp: 3B6C94CE 2009-11-12
ECC change: 0x4C Filetbl: 0x0343 Secdata: 0x0128 Timestamp: 3B6AA72C 2009-11-10
ECC change: 0x48 Filetbl: 0x0127 Secdata: 0x0354 Timestamp: 3B375E85 2009-09-23

0354 containts not 0 values above offset 1024 or zeros below 1024 (overwritten)

tigertron
REMOVE THE LINK TO NAND FROM YOUR POST!!!

[boby2pc]

If second pair did't work I don't know solution for Your problem.

revert the changes by:
nandpro lpt: -W16 secdata0233.bin 233 1
nandpro lpt: -w16 filetable00DE.bin 0DE 1

Didn't work.

sorry, but it's not possible that reverting changes didn't work

Will be any other solution for this? Or I must forget this box? What is wrong my nand file? Cant repair the good date secdata.bin wich is maybe overwritten or change it from another same box? (zephyr)

Thank You!

If You have verified first dump then restore it, write first patch generated by findsecdata.
It must work unless You have bad dump or banned both secdata.bins

[SamZ]

hameleonick, tigertron
Yours old secdata.bin files are overwritten and nothing You can do

SamZ:
I don't know when You banned. If 12 of novermber and you didn't boot xbox without dvd since
last dump then patch will work. if booted without dvd then dump again, generate new patch and patch immidietly.
If 10 of november Your old secdata.bin is overwritten.

Last filetable change: 0x54
ECC change: 0x54 Filetbl: 0x011B Secdata: 0x0344 Timestamp: 3B6C94CE 2009-11-12
ECC change: 0x4C Filetbl: 0x0343 Secdata: 0x0128 Timestamp: 3B6AA72C 2009-11-10
ECC change: 0x48 Filetbl: 0x0127 Secdata: 0x0354 Timestamp: 3B375E85 2009-09-23

0354 containts not 0 values above offset 1024 or zeros below 1024 (overwritten)

tigertron
REMOVE THE LINK TO NAND FROM YOUR POST!!!

Well i updated my dashboard post ban so i guess im screwed. I retrospect it feels like a pretty bad idea hehe. Thanks for the reply though Boby2pc you do great work!

[spider2]

[/quote]

If You have verified first dump then restore it, write first patch generated by findsecdata.
It must work unless You have bad dump or banned both secdata.bins

[/quote]

I verified 4 dumps and all was the same. Then patched one of them and write it back. Nothing changed...
I'dont know wich secdata.bin banned.

[alexxandrepeixoto]

If u banned before u can make a restore of u nand using ur old nand.

[spider2]

If u banned before u can make a restore of u nand using ur old nand.

I havent got old nand. I start making this procedure after when I banned.

[boby2pc]

I verified 4 dumps and all was the same. Then patched one of them and write it back. Nothing changed...
I'dont know wich secdata.bin banned.

findsecdata doesn't modify anythig. It creates files to patch and shows patching commands.

You had to write back whole first dump to nand and run two commands which findsecdata shows.
If it won't work Your both secdata.bins are banned.