|
dusan75
|
 |
« Reply #200 on: November 28, 2009, 03:55:12 AM » |
|
Same problem here with three consoles.  This is one original banned nand backup: http://www.megaupload.com/?d=15IW30SAI tryed everything, patched with findsecdata 0.4, patch with 360hdr , zeroed out all secdata.bin but hdd install still not working. xval2.0 report console banned, or secdata is invalid FFFFF. |
|
|
|
« Last Edit: November 28, 2009, 04:27:25 AM by dusan75 »
|
Logged
|
|
|
|
Xantos
Newbie
Posts: 3
|
|
« Reply #201 on: November 28, 2009, 05:17:39 AM » |
|
Thanks for this great tool. I've had a try and unfortunately I seem to be getting a similar error to Mossolb. I've tried calculating it manually though I'm not convienced my calculations were correct. This could well be a bit of an oddity anyway, you can see the ban date of 2009-11-05, the 2009-10-28 is the dash update released on that date. My console is a refurb which I got on 2009-10-20 so it could well be there isn't sufficient data on the NAND to support recovery. boby2pc, I'll send a you PM with a link to my NAND if you would be kind enough to take a look. I think I'm out of luck on this one though.   |
|
|
|
|
Logged
|
|
|
|
|
boby2pc
|
|
« Reply #202 on: November 28, 2009, 05:30:59 AM » |
|
Here is my nand http://www.mossolb.com/files/falcon_nandtest.rarThis 360 was played a lot less than the other one I was able to restore prior to the banning, that is all I can think of. Edit* fixed the link if anyone else wants to play with it. Thanks for your help boby2pc. Checked and it's another with secdata.bin overwritten. The unbanned one was in block 0x25D and something updated it |
|
|
|
|
Logged
|
|
|
|
Mossolb
Newbie
Posts: 4
|
|
« Reply #203 on: November 28, 2009, 05:37:11 AM » |
|
Xantos, have you tried to do the manual way of hex editing and zeroing out 0x132? It looks like you have a better chance of restoring it than I have since I only have two dates, the initial date and the day it was banned which also was the date I updated, so it just might not have enough for it.
|
|
|
|
|
Logged
|
|
|
|
mastah
Newbie
Posts: 5
|
|
« Reply #204 on: November 28, 2009, 05:39:18 AM » |
|
boby2pc, i have run findsecdata with my nand dump. The funny thing is that the console was banned 2009-11-13 and the findsecdata find that timestamp. 360HDFRv1.03 says that the last timestamp was 2009-11-17  This is my log, please help me to point out what i should do next? C:\>findsecdata test.bin
findsecdata v0.42 2009-11-28 by boby2pc
Controller version 1
Last filetable change: 0xC1
ECC change: 0xC1 Filetbl: 0x024F Secdata: 0x024E Timestamp: 33766001 2005-11-22
ECC change: 0xC0 Filetbl: 0x024D Secdata: 0x024C Timestamp: 3B6D72FD 2009-11-13
ECC change: 0xBF Filetbl: 0x024B Secdata: 0x02EB Timestamp: 3B5F4A5C 2009-10-31
ECC change: 0xBC Filetbl: 0x02F1 Secdata: 0x02EB Timestamp: 3B5F4A5C 2009-10-31
ECC change: 0xB7 Filetbl: 0x02EA Secdata: 0x0302 Timestamp: 33766001 2005-11-22
Checking secdata:
0302 containts not 0 values above offset 1024
Searching for recommended
Extracting secdata:
secdata024E.bin
secdata024C.bin
secdata02EB.bin
secdata02EB.bin
Extracting filetables:
filetable024F.bin
filetable024D.bin
filetable024B.bin
filetable02F1.bin
Creating patched filetables:
Patchedfiletable024FBy024F.bin
Patchedfiletable024FBy024B.bin
Patchedfiletable024FBy02F1.bin
Use:
nandpro.exe lpt: -W16 secdata02EB.bin 24E 1
nandpro.exe lpt: -w16 Patchedfiletable024FBy024B.bin 24F 1
Press ENTER regards mastah |
|
|
|
|
Logged
|
|
|
|
Xantos
Newbie
Posts: 3
|
|
« Reply #205 on: November 28, 2009, 05:45:15 AM » |
|
Thanks mossolb, I've not tried zeroing 0x132 yet. That's not the offset my calculations turned out so I was a little hesitant to start overwriting things.
I'll hook it all back up later and have another look.
|
|
|
|
|
Logged
|
|
|
|
|
boby2pc
|
|
« Reply #206 on: November 28, 2009, 06:10:02 AM » |
|
boby2pc, i have run findsecdata with my nand dump. The funny thing is that the console was banned 2009-11-13 and the findsecdata find that timestamp. 360HDFRv1.03 says that the last timestamp was 2009-11-17 This is my log, please help me to point out what i should do next? C:\>findsecdata test.bin
findsecdata v0.42 2009-11-28 by boby2pc
Controller version 1
Last filetable change: 0xC1
ECC change: 0xC1 Filetbl: 0x024F Secdata: 0x024E Timestamp: 33766001 2005-11-22
ECC change: 0xC0 Filetbl: 0x024D Secdata: 0x024C Timestamp: 3B6D72FD 2009-11-13
ECC change: 0xBF Filetbl: 0x024B Secdata: 0x02EB Timestamp: 3B5F4A5C 2009-10-31
ECC change: 0xBC Filetbl: 0x02F1 Secdata: 0x02EB Timestamp: 3B5F4A5C 2009-10-31
ECC change: 0xB7 Filetbl: 0x02EA Secdata: 0x0302 Timestamp: 33766001 2005-11-22
Checking secdata:
0302 containts not 0 values above offset 1024
Searching for recommended
Extracting secdata:
secdata024E.bin
secdata024C.bin
secdata02EB.bin
secdata02EB.bin
Extracting filetables:
filetable024F.bin
filetable024D.bin
filetable024B.bin
filetable02F1.bin
Creating patched filetables:
Patchedfiletable024FBy024F.bin
Patchedfiletable024FBy024B.bin
Patchedfiletable024FBy02F1.bin
Use:
nandpro.exe lpt: -W16 secdata02EB.bin 24E 1
nandpro.exe lpt: -w16 Patchedfiletable024FBy024B.bin 24F 1
Press ENTER regards mastah if You didn't delete anything then nandpro.exe lpt: -W16 secdata02EB.bin 24E 1 nandpro.exe lpt: -w16 Patchedfiletable024FBy024B.bin 24F 1 should be fine |
|
|
|
|
Logged
|
|
|
|
|
boby2pc
|
|
« Reply #207 on: November 28, 2009, 06:20:13 AM » |
|
Thanks for this great tool. I've had a try and unfortunately I seem to be getting a similar error to Mossolb. I've tried calculating it manually though I'm not convienced my calculations were correct. This could well be a bit of an oddity anyway, you can see the ban date of 2009-11-05, the 2009-10-28 is the dash update released on that date. My console is a refurb which I got on 2009-10-20 so it could well be there isn't sufficient data on the NAND to support recovery. boby2pc, I'll send a you PM with a link to my NAND if you would be kind enough to take a look. I think I'm out of luck on this one though. secdata.bin is overwritten indeed (look at address $DD3400 = $35A*$4200). I don't know what it is, but it's not secadata |
|
|
|
|
Logged
|
|
|
|
mastah
Newbie
Posts: 5
|
|
« Reply #208 on: November 28, 2009, 06:21:37 AM » |
|
boby2pc, i have run findsecdata with my nand dump. The funny thing is that the console was banned 2009-11-13 and the findsecdata find that timestamp. 360HDFRv1.03 says that the last timestamp was 2009-11-17 This is my log, please help me to point out what i should do next? C:\>findsecdata test.bin
findsecdata v0.42 2009-11-28 by boby2pc
Controller version 1
Last filetable change: 0xC1
ECC change: 0xC1 Filetbl: 0x024F Secdata: 0x024E Timestamp: 33766001 2005-11-22
ECC change: 0xC0 Filetbl: 0x024D Secdata: 0x024C Timestamp: 3B6D72FD 2009-11-13
ECC change: 0xBF Filetbl: 0x024B Secdata: 0x02EB Timestamp: 3B5F4A5C 2009-10-31
ECC change: 0xBC Filetbl: 0x02F1 Secdata: 0x02EB Timestamp: 3B5F4A5C 2009-10-31
ECC change: 0xB7 Filetbl: 0x02EA Secdata: 0x0302 Timestamp: 33766001 2005-11-22
Checking secdata:
0302 containts not 0 values above offset 1024
Searching for recommended
Extracting secdata:
secdata024E.bin
secdata024C.bin
secdata02EB.bin
secdata02EB.bin
Extracting filetables:
filetable024F.bin
filetable024D.bin
filetable024B.bin
filetable02F1.bin
Creating patched filetables:
Patchedfiletable024FBy024F.bin
Patchedfiletable024FBy024B.bin
Patchedfiletable024FBy02F1.bin
Use:
nandpro.exe lpt: -W16 secdata02EB.bin 24E 1
nandpro.exe lpt: -w16 Patchedfiletable024FBy024B.bin 24F 1
Press ENTER regards mastah if You didn't delete anything then nandpro.exe lpt: -W16 secdata02EB.bin 24E 1 nandpro.exe lpt: -w16 Patchedfiletable024FBy024B.bin 24F 1 should be fine I did zero out 0x24d yesterday and write it back to nand. Gameinstall on HD still not possible. I got error: 250 reading block 0x24d but bin is ok when dumped. The .bin i use with findsectdata was the untouched dump. Shall i do a new dump of whole nand again and run the findsecdata with that dump? mastah |
|
|
|
|
Logged
|
|
|
|
|
dgx
|
|
« Reply #209 on: November 28, 2009, 06:28:39 AM » |
|
i just wanna say thanks 4 this as it sorted my son box out try all ways with others but none worked 4 me.ran my nand thought this and gave me NandPro.exe lpt: -W16 secdata025E.bin 1EA 1 nandpro.exe lpt: -w16 Patchedfiletable01EBBy03CE.bin 1EB 1 and it worked so a big thanks ps i just got to remeber how i got it to run now as i aint had much sleep lol but my 5 year old is happy... will this work with a jaspers 256  |
|
|
|
|
Logged
|
|
|
|
Xantos
Newbie
Posts: 3
|
|
« Reply #210 on: November 28, 2009, 06:41:25 AM » |
|
Thanks for taking a look.
|
|
|
|
|
Logged
|
|
|
|
|
boby2pc
|
|
« Reply #211 on: November 28, 2009, 06:47:52 AM » |
|
Same problem here with three consoles. This is one original banned nand backup: http://www.megaupload.com/?d=15IW30SAI tryed everything, patched with findsecdata 0.4, patch with 360hdr , zeroed out all secdata.bin but hdd install still not working. xval2.0 report console banned, or secdata is invalid FFFFF. when were You banned 09-11-2009 or 27-11-2009 ? if 27-11-2009 then if you didn't modify anything else nandpro.exe lpt: -W16 secdata0122.bin 2AC 1 nandpro.exe lpt: -w16 Patchedfiletable0110By02AB.bin 110 1 should be ok if 09-11-2009 then previous secdata is overwritten. |
|
|
|
|
Logged
|
|
|
|
|
boby2pc
|
|
« Reply #212 on: November 28, 2009, 06:56:19 AM » |
|
boby2pc, i have run findsecdata with my nand dump. The funny thing is that the console was banned 2009-11-13 and the findsecdata find that timestamp. 360HDFRv1.03 says that the last timestamp was 2009-11-17 This is my log, please help me to point out what i should do next? C:\>findsecdata test.bin
findsecdata v0.42 2009-11-28 by boby2pc
Controller version 1
Last filetable change: 0xC1
ECC change: 0xC1 Filetbl: 0x024F Secdata: 0x024E Timestamp: 33766001 2005-11-22
ECC change: 0xC0 Filetbl: 0x024D Secdata: 0x024C Timestamp: 3B6D72FD 2009-11-13
ECC change: 0xBF Filetbl: 0x024B Secdata: 0x02EB Timestamp: 3B5F4A5C 2009-10-31
ECC change: 0xBC Filetbl: 0x02F1 Secdata: 0x02EB Timestamp: 3B5F4A5C 2009-10-31
ECC change: 0xB7 Filetbl: 0x02EA Secdata: 0x0302 Timestamp: 33766001 2005-11-22
Checking secdata:
0302 containts not 0 values above offset 1024
Searching for recommended
Extracting secdata:
secdata024E.bin
secdata024C.bin
secdata02EB.bin
secdata02EB.bin
Extracting filetables:
filetable024F.bin
filetable024D.bin
filetable024B.bin
filetable02F1.bin
Creating patched filetables:
Patchedfiletable024FBy024F.bin
Patchedfiletable024FBy024B.bin
Patchedfiletable024FBy02F1.bin
Use:
nandpro.exe lpt: -W16 secdata02EB.bin 24E 1
nandpro.exe lpt: -w16 Patchedfiletable024FBy024B.bin 24F 1
Press ENTER regards mastah if You didn't delete anything then nandpro.exe lpt: -W16 secdata02EB.bin 24E 1 nandpro.exe lpt: -w16 Patchedfiletable024FBy024B.bin 24F 1 should be fine I did zero out 0x24d yesterday and write it back to nand. Gameinstall on HD still not possible. I got error: 250 reading block 0x24d but bin is ok when dumped. The .bin i use with findsectdata was the untouched dump. Shall i do a new dump of whole nand again and run the findsecdata with that dump? mastah no, if You only zered 0x24d it's ok. You could restore this one with file dumped with findsecdata: nandpro.exe lpt: -w16 filetable024D.bin 24D 1 small "w" should be used. then try to read that block again, it should be without errors: nandpro.exe lpt: -r16 temp.bin 24D 1 then write to flash patch which mentioned in previous post: nandpro.exe lpt: -W16 secdata02EB.bin 24E 1 nandpro.exe lpt: -w16 Patchedfiletable024FBy024B.bin 24F 1 I did one mistake a few minutes ago in this post, read it again |
|
|
|
« Last Edit: November 28, 2009, 07:08:43 AM by boby2pc »
|
Logged
|
|
|
|
mastah
Newbie
Posts: 5
|
|
« Reply #213 on: November 28, 2009, 07:10:38 AM » |
|
boby2pc, i dont have any file called "secdata024D.bin". Please, check the log, only 3 secdata files is in my directory. secdata024E.bin secdata02EB.bin secdata024E.bin what shall i do, i have the bin of 0x24D "unmodified" on my hd, can i use that? mastah !! My bad, did not see that you meant "filetable024D.bin" not secdata024D.bin ..... i'm stupid  Shall test it now. mastah |
|
|
|
« Last Edit: November 28, 2009, 07:19:52 AM by mastah »
|
Logged
|
|
|
|
|
boby2pc
|
|
« Reply #214 on: November 28, 2009, 07:20:24 AM » |
|
mastah,
I have modified the post, read it again
|
|
|
|
|
Logged
|
|
|
|
mastah
Newbie
Posts: 5
|
|
« Reply #215 on: November 28, 2009, 07:29:08 AM » |
|
mastah,
I have modified the post, read it again
Yeah, i saw that ..... i must use F5 more Did work fine to write back 24D as you described. Now i shall try write those other files to nand and see what happens. mastah |
|
|
|
|
Logged
|
|
|
|
mastah
Newbie
Posts: 5
|
|
« Reply #216 on: November 28, 2009, 07:44:47 AM » |
|
I must say this forum is GREAT!!! Works now like a charm, i'm installing game to xbox360 HD at this very minute  Thank you boby2pc to helped me out, what should we do if guys like you not exist here.  mastah |
|
|
|
|
Logged
|
|
|
|
|
|
|
boby2pc
|
|
« Reply #218 on: November 28, 2009, 10:43:23 AM » |
|
I must say this forum is GREAT!!! Works now like a charm, i'm installing game to xbox360 HD at this very minute Thank you boby2pc to helped me out, what should we do if guys like you not exist here. mastah I agree that this forum and people on this forum are great. Thanks to their hard work it is all possible. |
|
|
|
|
Logged
|
|
|
|
|
dak
|
|
« Reply #219 on: November 28, 2009, 12:04:11 PM » |
|
findsecdata nand.bin
findsecdata v0.4 2009-11-26 by boby2pc
Controller version 1
Last filetable change: 0x82
ECC change: 0x82 Filetbl: 0x039B Secdata: 0x039A Timestamp: 3B6D4DEB 2009-11-12
ECC change: 0x79 Filetbl: 0x00E7 Secdata: 0x0100 Timestamp: 3B3ABBCA 2009-09-23
Checking secdata:
0100 containts not 0 values above offset 1024
Searching for recommended
Extracting secdata:
secdata039A.bin
Extracting filetables:
filetable039B.bin
Creating patched filetables:
Use:
Old secdata.bin not found. Console might be not banned, already patched or secda
ta.bin overwritten.
Press ENTER
tried zeroing 0x039B but it didnt help would be nice if some1 could take a look at it and tell me that i have bad luck... -link deleted- Secdata Scan v0.2 finds 6 secdata.bins id try to use these manually with nandpro, but i dont get what u change in the patched filetables -.- |
|
|
|
« Last Edit: December 05, 2009, 07:07:16 AM by dak »
|
Logged
|
|
|
|
|
