restore hdd game install after ban with nand backup?

[asapreta]

Last filetable change: 0x61


For a couple of times it was mentioned not to turn on the console without the dvd drive when trying to do the hdd recover. Why? Need to redump or it messes everything up?

Last filetable change will grow if you booted without dvd drive. The patch won't work then.

Dump again, run findsecdata on new dump with -rc 5 option. Run nandpro pair of commands which refers to secdata.bin file in block 24A in first nand and 283 on second nand.

Thanks for the answer. I'm forwarding it to him now!
Hope he can fix this and let you know.

[purplepill]

Boby2pc, could you please help?

I think this is a no go, but I thought I'd try anyways.

Code:

findsecdata v0.61 2009-12-01 by boby2pc
Controller version 1
Last filetable change: 0x90
ECC change: 0x90 Filetbl: 0x0286 Secdata: 0x0367 Timestamp: 33766001 2005-11-22
ECC change: 0x8D Filetbl: 0x0375 Secdata: 0x0367 Timestamp: 33766001 2005-11-22
ECC change: 0x88 Filetbl: 0x0366 Secdata: 0x0292 Timestamp: 3B6E1508 2009-11-14
ECC change: 0x84 Filetbl: 0x0291 Secdata: 0x0377 Timestamp: 3B2D2037 2009-09-13

Checking secdata:
0377 containts not 0 values above offset 1024

Searching for recommended

Extracting secdata:
secdata0367.bin
secdata0367.bin
secdata0292.bin

Extracting filetables:
filetable0286.bin
filetable0375.bin
filetable0366.bin

Creating patched secdata:
Patchedsecdata0367.bin
Patchedsecdata0367.bin
Patchedsecdata0292.bin

Creating patched filetables:
Patchedfiletable0286By0286.bin
Patchedfiletable0286By0375.bin

Use:

Old secdata.bin not found. Console might be not banned, already patched or secda
ta.bin overwritten.

[asapreta]

Last filetable change: 0x61


For a couple of times it was mentioned not to turn on the console without the dvd drive when trying to do the hdd recover. Why? Need to redump or it messes everything up?

Last filetable change will grow if you booted without dvd drive. The patch won't work then.

Dump again, run findsecdata on new dump with -rc 5 option. Run nandpro pair of commands which refers to secdata.bin file in block 24A in first nand and 283 on second nand.

Thanks for the answer. I'm forwarding it to him now!
Hope he can fix this and let you know.

boby2pc,

hi.
He did the wiring and dumped the "new" NAND.
The two new dumps were exact and different from the first pair he did yesterday.

He got this:

Code:

findsecdata v0.62 2009-12-09 by boby2pc
Controller version 1
Last filetable change: 0x61
ECC change: 0x61 Filetbl: 0x00F8 Secdata: 0x00F7 Timestamp: 3B5EBE8F 2009-10-30
ECC change: 0x60 Filetbl: 0x00F6 Secdata: 0x024A Timestamp: 3B5EBE8F 2009-10-30
ECC change: 0x58 Filetbl: 0x0249 Secdata: 0x0261 Timestamp: 3B379A69 2009-09-23

Checking secdata:
0261 containts not 0 values above offset 1024 or zeros below 1024 (overwritten)

Searching for recommended

Extracting secdata:
secdata00F7.bin
secdata024A.bin

Extracting filetables:
filetable00F8.bin
filetable00F6.bin

Creating patched secdata:
Patchedsecdata00F7.bin
Patchedsecdata024A.bin

Creating patched filetables:
Patchedfiletable00F8By00F6.bin

Use:
nandpro.exe lpt: -w16 Patchedsecdata024A.bin 0F7 1
nandpro.exe lpt: -w16 Patchedfiletable00F8By00F6.bin 0F8 1

Press ENTER

EDIT, he just phoned. Same DIRT DISC message. He mentioned the games he has on the HDD, installed prior to the ban wave, are working.

[boby2pc]

he just phoned. Same DIRT DISC message. He mentioned the games he has on the HDD, installed prior to the ban wave, are working.

looks ok. Don't know why he failed.

Ban wave started 30-10-2009. He might get caught that day.

[asapreta]

he just phoned. Same DIRT DISC message. He mentioned the games he has on the HDD, installed prior to the ban wave, are working.

looks ok. Don't know why he failed.

Ban wave started 30-10-2009. He might get caught that day.

I asked him about the "quality" of his backups, but he tried with original games too and the dirt disk message prevents him to install the game on the HDD.
Strange isn't it? The "dirt disc message" is related to the hack? The same games play fine through the DVD drive.
Looking carefully to the "logs" of findsecdata he sent me, both are identical, for different NAND dumps (the ones for yesterday and the newer one). Is this correct?

[boby2pc]

Strange isn't it? The "dirt disc message" is related to the hack? The same games play fine through the DVD drive.
Looking carefully to the "logs" of findsecdata he sent me, both are identical, for different NAND dumps (the ones for yesterday and the newer one). Is this correct?

Sorry, I lost context. "dirt disc message" is not related to restoring old secdata.bin.

Both dumps were ok and he didn't boot without dvd drive.

[asapreta]

Strange isn't it? The "dirt disc message" is related to the hack? The same games play fine through the DVD drive.
Looking carefully to the "logs" of findsecdata he sent me, both are identical, for different NAND dumps (the ones for yesterday and the newer one). Is this correct?

Sorry, I lost context. "dirt disc message" is not related to restoring old secdata.bin.

Both dumps were ok and he didn't boot without dvd drive.

He said that the only message that appears for him is this one when he tries to install a game to the HDD: "this disc can't be read, maybe dirt. clean with a cloth" (or something like that).

I asked him to use the Patchedsecdata00F7.bin instead of Patchedsecdata024A.bin
Let's see the results.

EDIT:

It worked (thanks God! - two days this guy was hooked to my MSN)!!!
He already installed 2 games!

Thanks for the help!

[porsche_fanatic]

guys.....
i wasn't able to uncripple my hdd anyhow, so i tried to flash my backup of nand back onto the 360, to try out something else all over again, and now i'm stuck with E79...
i read the NAND without errors, but while writing i got 'error: 300 programming block xxxx', from block 4AA1 to 4DB1.. each time...
tried to flash 3 times, each consuming 14-16 hrs via LPT... so any suggestions on how to get rid of the E79...

[asapreta]

Ops!!! It's me again.

Everything was fine with my friend's HDD until he hooked up his console to his network to play on KAI.
Now the HDD is crippled again.
As he played on KAI, his console had internet access. My best guess is when the console connected to the Live Servers, the hack was reversed, as a new/updated secdata.bin was saved to his NAND.

Any clues?

[routehero]

Disable Live.  Every time you reconnect it will corrupt a banned console.

[boby2pc]

Ops!!! It's me again.

Everything was fine with my friend's HDD until he hooked up his console to his network to play on KAI.
Now the HDD is crippled again.
As he played on KAI, his console had internet access. My best guess is when the console connected to the Live Servers, the hack was reversed, as a new/updated secdata.bin was saved to his NAND.

Any clues?

Exactly, disable live (on parental control menu) and don't use test connection anymore (system ... menu).
To rescue nand. Dump again and patch if it's not overwritten.

[purplepill]

so is there any hope for my xbox? http://www.xboxhacker.org/index.php?topic=12759.msg101455#msg101455

[boby2pc]

so is there any hope for my xbox? http://www.xboxhacker.org/index.php?topic=12759.msg101455#msg101455

no, for now

[porsche_fanatic]

author=porsche_fanatic link=topic=12759.msg101648#msg101648 date=1265553395]
guys.....
i wasn't able to uncripple my hdd anyhow, so i tried to flash my backup of nand back onto the 360, to try out something else all over again, and now i'm stuck with E79...
i read the NAND without errors, but while writing i got 'error: 300 programming block xxxx', from block 4AA1 to 4DB1.. each time...
tried to flash 3 times, each consuming 14-16 hrs via LPT... so any suggestions on how to get rid of the E79...

is there anything that can be done to get my console working again
BTW I'm using the following command for restoring the nand..
nandpro.exe lpt: -w512 nand.bin
is there anything wrong with this

[boby2pc]

author=porsche_fanatic link=topic=12759.msg101648#msg101648 date=1265553395]
guys.....
i wasn't able to uncripple my hdd anyhow, so i tried to flash my backup of nand back onto the 360, to try out something else all over again, and now i'm stuck with E79...
i read the NAND without errors, but while writing i got 'error: 300 programming block xxxx', from block 4AA1 to 4DB1.. each time...
tried to flash 3 times, each consuming 14-16 hrs via LPT... so any suggestions on how to get rid of the E79...

is there anything that can be done to get my console working again
BTW I'm using the following command for restoring the nand..
nandpro.exe lpt: -w512 nand.bin
is there anything wrong with this

send me PM link to Your dump. I will check it for bad block existance and tell You if it's possible to make it working.

[enito]

Mr bobby , i try to patch my nand and no way...i show you the logs..thx for your time!


C:\Users\enito\xbox360\findsec>FindSecData.exe nam1.bin

findsecdata v0.62 2009-12-09 by boby2pc
Controller version 1
Last filetable change: 0x9E
ECC change: 0x9E Filetbl: 0x02EF Secdata: 0x03D0 Timestamp: 33766001 2005-11-22
ECC change: 0x96 Filetbl: 0x03CF Secdata: 0x0337 Timestamp: 33766001 2005-11-22
ECC change: 0x92 Filetbl: 0x0336 Secdata: 0x0335 Timestamp: 33766001 2005-11-22
ECC change: 0x91 Filetbl: 0x0334 Secdata: 0x0333 Timestamp: 3B673D67 2009-11-07
ECC change: 0x90 Filetbl: 0x0332 Secdata: 0x03AC Timestamp: 33766001 2005-11-22

Checking secdata:
03AC containts not 0 values above offset 1024 or zeros below 1024 (overwritten)

Searching for recommended

Extracting secdata:
secdata03D0.bin
secdata0337.bin
secdata0335.bin
secdata0333.bin

Extracting filetables:
filetable02EF.bin
filetable03CF.bin
filetable0336.bin
filetable0334.bin

Creating patched secdata:
Patchedsecdata03D0.bin
Patchedsecdata0337.bin
Patchedsecdata0335.bin
Patchedsecdata0333.bin

Creating patched filetables:
Patchedfiletable02EFBy02EF.bin
Patchedfiletable02EFBy03CF.bin
Patchedfiletable02EFBy0336.bin

Use:

Old secdata.bin not found. Console might be not banned, already patched or secda
ta.bin overwritten.

Press ENTER

thx !!!!!

[porsche_fanatic]

send me PM link to Your dump. I will check it for bad block existance and tell You if it's possible to make it working.

thanks for your reply, but where do i upload a 540MB file should i make archive pieces and upload on rapidshare ??

EDIT : just split the archive into pieces, and discovered that the total size of archives is 120 MB irrespective of what size of archives i chose, I am sending you PM with the link....uploading now.

[ericattack]

Hi,

I have uncrippled 5 of my friends 360's so far. All without a prob. 16mb and 256mb models.
Now with this last 360 i cant get it uncrippled. I cant install the game to the HD. I think there is something wrong with the 2005 stamp because the 360 was build in 2007. Findsecdata tells me to delete B35 so i did. It did no good. I manually zero'd the two 2009-11-08's too. Still no good. Then i putted back orig nand and started over with the two 2009-11-08's and leaving the 2005 as is. No good. Now i zero'd them all one by one and after deleting all this 8 secdata's im still having the install prob. The 360 does boot like normal though. What should i do? I had 14 secdata's in orig nand. All other 6 that are not mentioned by findsecdata have timestamp 3B5CA8A9.

ECC change: 0x66 Filetbl: 0x0B35 Secdata: 0x0054 Timestamp: 33766001 2005-11-22
ECC change: 0x65 Filetbl: 0x0B2C Secdata: 0x0044 Timestamp: 3B68AE50 2009-11-08
ECC change: 0x64 Filetbl: 0x0B1D Secdata: 0x003C Timestamp: 3B68AE50 2009-11-08
ECC change: 0x63 Filetbl: 0x0B14 Secdata: 0x002D Timestamp: 3B5CA8A9 2009-10-28
ECC change: 0x62 Filetbl: 0x0B06 Secdata: 0x0025 Timestamp: 3B5CA8A9 2009-10-28
ECC change: 0x61 Filetbl: 0x0AFE Secdata: 0x001D Timestamp: 3B5CA8A9 2009-10-28
ECC change: 0x60 Filetbl: 0x0EDF Secdata: 0x013F Timestamp: 3B5CA8A9 2009-10-28
ECC change: 0x5A Filetbl: 0x0B9A Secdata: 0x03EC Timestamp: 3B5CA8A9 2009-10-28

[mosses]

i m stuck with this one its a with jasper 256mb after putting in the following commands still the functionality is not restored and i have connected the dvd drive b4 turning on the console..

any suggestions boby2pc

findsecdata v0.61 2009-12-01 by boby2pc
Controller version 3
Last filetable change: 0x6A
ECC change: 0x6A Filetbl: 0x0B5D Secdata: 0x007C Timestamp: 33766001 2005-11-22
ECC change: 0x69 Filetbl: 0x0B54 Secdata: 0x006C Timestamp: 33766001 2005-11-22
ECC change: 0x68 Filetbl: 0x0B45 Secdata: 0x0064 Timestamp: 33766001 2005-11-22
ECC change: 0x67 Filetbl: 0x0B34 Secdata: 0x004C Timestamp: 33766001 2005-11-22
ECC change: 0x66 Filetbl: 0x0B25 Secdata: 0x0044 Timestamp: 33766001 2005-11-22
ECC change: 0x65 Filetbl: 0x0B1C Secdata: 0x0034 Timestamp: 3B6C4B02 2009-11-12
ECC change: 0x64 Filetbl: 0x0B0D Secdata: 0x002C Timestamp: 3B6C4B02 2009-11-12
ECC change: 0x63 Filetbl: 0x0B04 Secdata: 0x001D Timestamp: 3B5C5084 2009-10-28
ECC change: 0x62 Filetbl: 0x0AE6 Secdata: 0x0005 Timestamp: 3B5C5084 2009-10-28
ECC change: 0x61 Filetbl: 0x0EDE Secdata: 0x03FD Timestamp: 3B5C5084 2009-10-28
ECC change: 0x60 Filetbl: 0x0ECF Secdata: 0x012F Timestamp: 3B5C5084 2009-10-28

Checking secdata:
012F containts not 0 values above offset 1024

Searching for recommended

Extracting secdata:
secdata007C.bin
secdata006C.bin
secdata0064.bin
secdata004C.bin
secdata0044.bin
secdata0034.bin
secdata002C.bin
secdata001D.bin
secdata0005.bin
secdata03FD.bin

Extracting filetables:
filetable0B5D.bin
filetable0B54.bin
filetable0B45.bin
filetable0B34.bin
filetable0B25.bin
filetable0B1C.bin
filetable0B0D.bin
filetable0B04.bin
filetable0AE6.bin
filetable0EDE.bin

Creating patched secdata:
Patchedsecdata007C.bin
Patchedsecdata006C.bin
Patchedsecdata0064.bin
Patchedsecdata004C.bin
Patchedsecdata0044.bin
Patchedsecdata0034.bin
Patchedsecdata002C.bin
Patchedsecdata001D.bin
Patchedsecdata0005.bin
Patchedsecdata03FD.bin

Creating patched filetables:
Patchedfiletable0B5DBy0B5D.bin
Patchedfiletable0B5DBy0B54.bin
Patchedfiletable0B5DBy0B45.bin
Patchedfiletable0B5DBy0B34.bin
Patchedfiletable0B5DBy0B25.bin
Patchedfiletable0B5DBy0B0D.bin
Patchedfiletable0B5DBy0B04.bin
Patchedfiletable0B5DBy0AE6.bin
Patchedfiletable0B5DBy0EDE.bin

Use:
nandpro.exe lpt: -w256 Patchedsecdata002C.bin B5C 1
nandpro.exe lpt: -w256 Patchedfiletable0B5DBy0B0D.bin B5D 1

Press ENTER

[boby2pc]

i m stuck with this one its a with jasper 256mb after putting in the following commands still the functionality is not restored and i have connected the dvd drive b4 turning on the console..

use second pair of commands after running findsecdata with -rc 5 option