XboxHacker BBS
 
*
Welcome, Guest. Please login or register.
Did you miss your activation email?
May 24, 2013, 03:15:43 AM


Login with username, password and session length


Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 »
  Print  
Author Topic: restore hdd game install after ban with nand backup?  (Read 119578 times)
boby2pc
Master Hacker
****
Posts: 169


View Profile
« Reply #440 on: December 29, 2009, 03:42:48 AM »

should be fixable right ??

YES!

C:\test>findsecdata falcon5005a.bin
nandpro.exe lpt: -w16 Patchedsecdata00F7.bin 12C 1
nandpro.exe lpt: -w16 Patchedfiletable012DBy0127.bin 12D 1

if you send both commands after restoring backup and not booting xbox without dvd drive since last restore then try:
nandpro.exe lpt: -W16 secdata00F7.bin 12C 1

if it work send me PM block copy1.bin (someone reported me that it worked but no feedback from him then plz help if last additional command worked):
nandpro.exe lpt: -r16 copy1.bin 12C 1


C:\test>findsecdata falcon5109a.bin

nandpro.exe lpt: -w16 Patchedsecdata0378.bin 14F 1
nandpro.exe lpt: -w16 Patchedfiletable0150By037E.bin 150 1


same as above if You tried those two commands then try (don't boot xbox without dvd drive):
nandpro.exe lpt: -W16 secdata0378.bin 14F 1

Logged
nicefile
Newbie
*
Posts: 4


View Profile
« Reply #441 on: December 29, 2009, 06:54:04 AM »

Just found issue with multiple banned secdata in nand
You will find that each time you try connect to XBL new banned secdata is created
to check file system timestamp i use fstool and nand backup
place fstool and banned.bin (u must rename your nand backup to that name)
run cmd /k c:/fstool in run tab on XP/2000
you will find that tool wiped out last known file system
...also you will know for rest file system versions and its location in hex.
Now its time for nandpro20b and own created dumhttp://www.xboxhacker.org/index.php?board=3.0my (all 0x00) file exact 4200bytes length
nandpro20b lpt: -w16 dummy.bin 0xHEX 1
now insted HEX place yours file system location from fstool output .Use hex address from highest file system number (often more than 100) ,then go to lower ....everytime try install game.

now for the unbanned hdd:
Even with no hdd u will have error stated that games can't be installed on systems without hdd ... and all hdd functions are restored.

big thx for whole xbox hacking scene
big sorry for my English ..
Logged
Testerman
Newbie
*
Posts: 1


View Profile
« Reply #442 on: December 31, 2009, 09:56:03 PM »

Hi boby2pc,

There is my findsecdata of dump of 256 (AE0 600)
Quote
C:\nand>findsecdata backup2.bin

findsecdata v0.62 2009-12-09 by boby2pc
Controller version 3
Last filetable change: 0x65
ECC change: 0x65 Filetbl: 0x0B21 Secdata: 0x0040 Timestamp: 33766001 2005-11-22
ECC change: 0x64 Filetbl: 0x0B18 Secdata: 0x0030 Timestamp: 3B9F05B7 2009-12-31
ECC change: 0x63 Filetbl: 0x0B09 Secdata: 0x0028 Timestamp: 3B9F05B7 2009-12-31
ECC change: 0x62 Filetbl: 0x0B00 Secdata: 0x0018 Timestamp: 3B5CA488 2009-10-28
ECC change: 0x60 Filetbl: 0x0EDA Secdata: 0x03F8 Timestamp: 3B5CA488 2009-10-28
ECC change: 0x5F Filetbl: 0x0ECB Secdata: 0x00E6 Timestamp: 3B5CA488 2009-10-28
ECC change: 0x5D Filetbl: 0x0BBF Secdata: 0x00DE Timestamp: 3B5CA488 2009-10-28
ECC change: 0x5C Filetbl: 0x0BA6 Secdata: 0x03EE Timestamp: 3B5CA488 2009-10-28

Checking secdata:
03EE containts not 0 values above offset 1024 or zeros below 1024 (overwritten)

Searching for recommended

Extracting secdata:
secdata0040.bin
secdata0030.bin
secdata0028.bin
secdata0018.bin
secdata03F8.bin
secdata00E6.bin
secdata00DE.bin

Extracting filetables:
filetable0B21.bin
filetable0B18.bin
filetable0B09.bin
filetable0B00.bin
filetable0EDA.bin
filetable0ECB.bin
filetable0BBF.bin

Creating patched secdata:
Patchedsecdata0040.bin
Patchedsecdata0030.bin
Patchedsecdata0028.bin
Patchedsecdata0018.bin
Patchedsecdata03F8.bin
Patchedsecdata00E6.bin
Patchedsecdata00DE.bin

Creating patched filetables:
Patchedfiletable0B21By0B21.bin
Patchedfiletable0B21By0B09.bin
Patchedfiletable0B21By0B00.bin
Patchedfiletable0B21By0EDA.bin
Patchedfiletable0B21By0ECB.bin
Patchedfiletable0B21By0BBF.bin

Use:
nandpro.exe lpt: -w256 Patchedsecdata0028.bin B20 1
nandpro.exe lpt: -w256 Patchedfiletable0B21By0B09.bin B21 1

Press ENTER

I do this, but hdd games instalation doesnt work, i think that we are overwriting a wrong findsecdata. Please help me, and sorry for my english, im braziliam. should be fix? Happy new year!!


Logged
boby2pc
Master Hacker
****
Posts: 169


View Profile
« Reply #443 on: January 01, 2010, 05:50:27 AM »

Hi boby2pc,

There is my findsecdata of dump of 256 (AE0 600)
Quote
C:\nand>findsecdata backup2.bin

findsecdata v0.62 2009-12-09 by boby2pc
Controller version 3
Last filetable change: 0x65
ECC change: 0x65 Filetbl: 0x0B21 Secdata: 0x0040 Timestamp: 33766001 2005-11-22
ECC change: 0x64 Filetbl: 0x0B18 Secdata: 0x0030 Timestamp: 3B9F05B7 2009-12-31
ECC change: 0x63 Filetbl: 0x0B09 Secdata: 0x0028 Timestamp: 3B9F05B7 2009-12-31
ECC change: 0x62 Filetbl: 0x0B00 Secdata: 0x0018 Timestamp: 3B5CA488 2009-10-28
ECC change: 0x60 Filetbl: 0x0EDA Secdata: 0x03F8 Timestamp: 3B5CA488 2009-10-28
ECC change: 0x5F Filetbl: 0x0ECB Secdata: 0x00E6 Timestamp: 3B5CA488 2009-10-28
ECC change: 0x5D Filetbl: 0x0BBF Secdata: 0x00DE Timestamp: 3B5CA488 2009-10-28
ECC change: 0x5C Filetbl: 0x0BA6 Secdata: 0x03EE Timestamp: 3B5CA488 2009-10-28

Checking secdata:
03EE containts not 0 values above offset 1024 or zeros below 1024 (overwritten)

Searching for recommended

Extracting secdata:
secdata0040.bin
secdata0030.bin
secdata0028.bin
secdata0018.bin
secdata03F8.bin
secdata00E6.bin
secdata00DE.bin

Extracting filetables:
filetable0B21.bin
filetable0B18.bin
filetable0B09.bin
filetable0B00.bin
filetable0EDA.bin
filetable0ECB.bin
filetable0BBF.bin

Creating patched secdata:
Patchedsecdata0040.bin
Patchedsecdata0030.bin
Patchedsecdata0028.bin
Patchedsecdata0018.bin
Patchedsecdata03F8.bin
Patchedsecdata00E6.bin
Patchedsecdata00DE.bin

Creating patched filetables:
Patchedfiletable0B21By0B21.bin
Patchedfiletable0B21By0B09.bin
Patchedfiletable0B21By0B00.bin
Patchedfiletable0B21By0EDA.bin
Patchedfiletable0B21By0ECB.bin
Patchedfiletable0B21By0BBF.bin

Use:
nandpro.exe lpt: -w256 Patchedsecdata0028.bin B20 1
nandpro.exe lpt: -w256 Patchedfiletable0B21By0B09.bin B21 1

Press ENTER

I do this, but hdd games instalation doesnt work, i think that we are overwriting a wrong findsecdata. Please help me, and sorry for my english, im braziliam. should be fix? Happy new year!!




first pair of commands didn't work because You have two inputs on ban date. You should run findsecdata with -rc 9 option to show more pair of commands. Try second pair which should be:

nandpro.exe lpt: -w256 Patchedsecdata0018.bin B20 1
nandpro.exe lpt: -w256 Patchedfiletable0B21By0B00.bin B21 1

If You didn't boot xbox without dvd drive connected since last dump this should work. If You booted need to dump again, and regenerate patch, use pair of commands which has file Patchedsecdata0018.bin in it (it refers to date 2009-10-28 which is propobly last unbanned one)
« Last Edit: January 01, 2010, 08:53:28 AM by boby2pc » Logged
oOreddragonOo
Newbie
*
Posts: 1


View Profile
« Reply #444 on: January 04, 2010, 07:22:24 PM »

Gday

Im also doing the uncripple but manage to get errors along the way
Ive trawled this forum from about page 7 till now and can see people getting the same error .. but the answer seems to be ... ask the Q!

Heres my details ..

I think i was banned around the 7th nov .. from memory .. will confirm when i get home

Any help would be great!

-----------------------------------
C:\Documents and Settings\admin\Desktop\FindSecDatav0.61>findsecdata AFTERCOMPARE1.bin

findsecdata v0.61 2009-12-01 by boby2pc
Controller version 1
Last filetable change: 0x69
ECC change: 0x69 Filetbl: 0x0198 Secdata: 0x0197 Timestamp: 33766001 2005-11-22
ECC change: 0x68 Filetbl: 0x0196 Secdata: 0x0195 Timestamp: 33766001 2005-11-22
ECC change: 0x67 Filetbl: 0x0194 Secdata: 0x0193 Timestamp: 3B6952C8 2009-11-09
ECC change: 0x66 Filetbl: 0x0192 Secdata: 0x02AC Timestamp: 3B5E5710 2009-10-30

Checking secdata:
02AC containts not 0 values above offset 1024

Searching for recommended

Extracting secdata:
secdata0197.bin
secdata0195.bin
secdata0193.bin

Extracting filetables:
filetable0198.bin
filetable0196.bin
filetable0194.bin

Creating patched secdata:
Patchedsecdata0197.bin
Patchedsecdata0195.bin
Patchedsecdata0193.bin

Creating patched filetables:
Patchedfiletable0198By0198.bin
Patchedfiletable0198By0196.bin

Use:

Old secdata.bin not found. Console might be not banned, already patched or secdata.bin overwritten.

Press ENTER
Logged
chase
Newbie
*
Posts: 8


View Profile
« Reply #445 on: January 06, 2010, 09:47:39 PM »

hello..

i dumped my nand 3 times using usb interface.. all 3 were identical..

ran findsecdata and this is what i got:


C:\Users\CH@SE\Desktop\n>findsecdata.exe nand.bin

findsecdata v0.62 2009-12-09 by boby2pc
Controller version 1
Last filetable change: 0x40
ECC change: 0x40 Filetbl: 0x01AC Secdata: 0x01AB Timestamp: 3B670D43 2009-11-07
ECC change: 0x3F Filetbl: 0x01AA Secdata: 0x0292 Timestamp: 3B610E32 2009-11-01
ECC change: 0x37 Filetbl: 0x0291 Secdata: 0x01BD Timestamp: 33766001 2005-11-22
ECC change: 0x33 Filetbl: 0x01BC Secdata: 0x02A5 Timestamp: 33766001 2005-11-22

Checking secdata:
02A5 containts not 0 values above offset 1024 or zeros below 1024 (overwritten)

Searching for recommended

Extracting secdata:
secdata01AB.bin
secdata0292.bin
secdata01BD.bin

Extracting filetables:
filetable01AC.bin
filetable01AA.bin
filetable0291.bin

Creating patched secdata:
Patchedsecdata01AB.bin
Patchedsecdata0292.bin
Patchedsecdata01BD.bin

Creating patched filetables:
Patchedfiletable01ACBy01AA.bin
Patchedfiletable01ACBy0291.bin

Use:
nandpro.exe lpt: -w16 Patchedsecdata0292.bin 1AB 1
nandpro.exe lpt: -w16 Patchedfiletable01ACBy01AA.bin 1AC 1

Press ENTER


flashed nand by using the following command :

nandpro usb: -w16 Patchedsecdata0292.bin 1AB 1

flash took less than 1 second Huh

now when i try to install game to hdd, it wont let me..

what have I done wrong ??

thanks
Logged
ivrj
Newbie
*
Posts: 1


View Profile
« Reply #446 on: January 09, 2010, 10:40:37 AM »

Quote
findsecdata v0.62 2009-12-09 by boby2pc
Controller version 3
Last filetable change: 0x5B
ECC change: 0x5B Filetbl: 0x0DFB Secdata: 0x031A Timestamp: 3B66B9F4 2009-11-06
ECC change: 0x5A Filetbl: 0x0B62 Secdata: 0x007A Timestamp: 33766001 2005-11-22
ECC change: 0x59 Filetbl: 0x0B53 Secdata: 0x0072 Timestamp: 33766001 2005-11-22
ECC change: 0x58 Filetbl: 0x0B4A Secdata: 0x005A Timestamp: 33766001 2005-11-22
ECC change: 0x57 Filetbl: 0x0B2B Secdata: 0x004A Timestamp: 33766001 2005-11-22
ECC change: 0x56 Filetbl: 0x0B22 Secdata: 0x0032 Timestamp: 33766001 2005-11-22
ECC change: 0x55 Filetbl: 0x0B0B Secdata: 0x002A Timestamp: 33766001 2005-11-22
ECC change: 0x54 Filetbl: 0x0B02 Secdata: 0x001A Timestamp: 33766001 2005-11-22
ECC change: 0x53 Filetbl: 0x0EDB Secdata: 0x03FA Timestamp: 33766001 2005-11-22
ECC change: 0x52 Filetbl: 0x0ED2 Secdata: 0x03EA Timestamp: 33766001 2005-11-22
ECC change: 0x51 Filetbl: 0x0EC3 Secdata: 0x03E2 Timestamp: 33766001 2005-11-22
ECC change: 0x50 Filetbl: 0x0EBA Secdata: 0x03D2 Timestamp: 3B66B9F4 2009-11-06
ECC change: 0x4F Filetbl: 0x0EA3 Secdata: 0x03C2 Timestamp: 3B66B9F4 2009-11-06
ECC change: 0x4E Filetbl: 0x0E2A Secdata: 0x032D Timestamp: 3B5D772F 2009-10-29
ECC change: 0x4B Filetbl: 0x0E05 Secdata: 0x0079 Timestamp: 3B5D772F 2009-10-29

Checking secdata:
0079 containts not 0 values above offset 1024 or zeros below 1024 (overwritten)

Searching for recommended

Extracting secdata:
secdata031A.bin
secdata007A.bin
secdata0072.bin
secdata005A.bin
secdata004A.bin
secdata0032.bin
secdata002A.bin
secdata001A.bin
secdata03FA.bin
secdata03EA.bin
secdata03E2.bin
secdata03D2.bin
secdata03C2.bin
secdata032D.bin

Extracting filetables:
filetable0DFB.bin
filetable0B62.bin
filetable0B53.bin
filetable0B4A.bin
filetable0B2B.bin
filetable0B22.bin
filetable0B0B.bin
filetable0B02.bin
filetable0EDB.bin
filetable0ED2.bin
filetable0EC3.bin
filetable0EBA.bin
filetable0EA3.bin
filetable0E2A.bin

Creating patched secdata:
Patchedsecdata031A.bin
Patchedsecdata007A.bin
Patchedsecdata0072.bin
Patchedsecdata005A.bin
Patchedsecdata004A.bin
Patchedsecdata0032.bin
Patchedsecdata002A.bin
Patchedsecdata001A.bin
Patchedsecdata03FA.bin
Patchedsecdata03EA.bin
Patchedsecdata03E2.bin
Patchedsecdata03D2.bin
Patchedsecdata03C2.bin
Patchedsecdata032D.bin

Creating patched filetables:
Patchedfiletable0DFBBy0B62.bin
Patchedfiletable0DFBBy0B53.bin
Patchedfiletable0DFBBy0B4A.bin
Patchedfiletable0DFBBy0B2B.bin
Patchedfiletable0DFBBy0B22.bin
Patchedfiletable0DFBBy0B0B.bin
Patchedfiletable0DFBBy0B02.bin
Patchedfiletable0DFBBy0EDB.bin
Patchedfiletable0DFBBy0ED2.bin
Patchedfiletable0DFBBy0EC3.bin
Patchedfiletable0DFBBy0EBA.bin
Patchedfiletable0DFBBy0EA3.bin
Patchedfiletable0DFBBy0E2A.bin

Use:
nandpro.exe lpt: -w512 Patchedsecdata03D2.bin DFA 1
nandpro.exe lpt: -w512 Patchedfiletable0DFBBy0EBA.bin DFB 1
or
nandpro.exe lpt: -w512 Patchedsecdata03C2.bin DFA 1
nandpro.exe lpt: -w512 Patchedfiletable0DFBBy0EA3.bin DFB 1
or
nandpro.exe lpt: -w512 Patchedsecdata032D.bin DFA 1
nandpro.exe lpt: -w512 Patchedfiletable0DFBBy0E2A.bin DFB 1
or
nandpro.exe lpt: -w512 Patchedsecdata007A.bin DFA 1
nandpro.exe lpt: -w512 Patchedfiletable0DFBBy0B62.bin DFB 1
or
nandpro.exe lpt: -w512 Patchedsecdata0072.bin DFA 1
nandpro.exe lpt: -w512 Patchedfiletable0DFBBy0B53.bin DFB 1
or
nandpro.exe lpt: -w512 Patchedsecdata005A.bin DFA 1
nandpro.exe lpt: -w512 Patchedfiletable0DFBBy0B4A.bin DFB 1
or
nandpro.exe lpt: -w512 Patchedsecdata004A.bin DFA 1
nandpro.exe lpt: -w512 Patchedfiletable0DFBBy0B2B.bin DFB 1
or
nandpro.exe lpt: -w512 Patchedsecdata0032.bin DFA 1
nandpro.exe lpt: -w512 Patchedfiletable0DFBBy0B22.bin DFB 1
or
nandpro.exe lpt: -w512 Patchedsecdata002A.bin DFA 1
nandpro.exe lpt: -w512 Patchedfiletable0DFBBy0B0B.bin DFB 1

Press ENTER
I try the first and the second pair of commands  without success.

This nand  can be fixed ?


/************************************************  Edit **************/

It works!!!!!

I saw the dates and reminded about the date of the ban. So I tried this command that has the date before my ban:

nandpro.exe lpt: -w512 Patchedsecdata032D.bin DFA 1
nandpro.exe lpt: -w512 Patchedfiletable0DFBBy0E2A.bin DFB 1

Ty a lot man!! Great Job!

« Last Edit: January 09, 2010, 05:38:23 PM by ivrj » Logged
sideache
Newbie
*
Posts: 1


View Profile
« Reply #447 on: January 09, 2010, 08:53:33 PM »

bob2pc
I was hoping you might be able to throw me a bone please. I have tried all these recommended flashes with no luck on be able to install games to the hard drive.
I am working on this for a buddy so I am not sure when it was banned.

findsecdata v0.62 2009-12-09 by boby2pc
Controller version 3
Last filetable change: 0xEB
ECC change: 0xEB Filetbl: 0x0E82 Secdata: 0x03A1 Timestamp: 33766001 2005-11-22
ECC change: 0xEA Filetbl: 0x0E79 Secdata: 0x0391 Timestamp: 33766001 2005-11-22
ECC change: 0xE9 Filetbl: 0x0E6A Secdata: 0x0389 Timestamp: 33766001 2005-11-22
ECC change: 0xE8 Filetbl: 0x0E61 Secdata: 0x0379 Timestamp: 3B661587 2009-11-06
ECC change: 0xE7 Filetbl: 0x0E52 Secdata: 0x0371 Timestamp: 3B661587 2009-11-06
ECC change: 0xE6 Filetbl: 0x0E49 Secdata: 0x034F Timestamp: 3B5CADD9 2009-10-28
ECC change: 0xE1 Filetbl: 0x0B48 Secdata: 0x0064 Timestamp: 3B5CADD9 2009-10-28
ECC change: 0xE0 Filetbl: 0x0B2F Secdata: 0x004B Timestamp: 3B5CADD9 2009-10-28
ECC change: 0xDF Filetbl: 0x0B27 Secdata: 0x0043 Timestamp: 3B5CADD9 2009-10-28
ECC change: 0xDE Filetbl: 0x0E91 Secdata: 0x011B Timestamp: 3B5CADD9 2009-10-28

Checking secdata:
011B containts not 0 values above offset 1024 or zeros below 1024 (overwritten)

Searching for recommended

Extracting secdata:
secdata03A1.bin
secdata0391.bin
secdata0389.bin
secdata0379.bin
secdata0371.bin
secdata034F.bin
secdata0064.bin
secdata004B.bin
secdata0043.bin

Extracting filetables:
filetable0E82.bin
filetable0E79.bin
filetable0E6A.bin
filetable0E61.bin
filetable0E52.bin
filetable0E49.bin
filetable0B48.bin
filetable0B2F.bin
filetable0B27.bin

Creating patched secdata:
Patchedsecdata03A1.bin
Patchedsecdata0391.bin
Patchedsecdata0389.bin
Patchedsecdata0379.bin
Patchedsecdata0371.bin
Patchedsecdata034F.bin
Patchedsecdata0064.bin
Patchedsecdata004B.bin
Patchedsecdata0043.bin

Creating patched filetables:
Patchedfiletable0E82By0E82.bin
Patchedfiletable0E82By0E79.bin
Patchedfiletable0E82By0E6A.bin
Patchedfiletable0E82By0E52.bin
Patchedfiletable0E82By0E49.bin
Patchedfiletable0E82By0B48.bin
Patchedfiletable0E82By0B2F.bin
Patchedfiletable0E82By0B27.bin

Use:
nandpro.exe lpt: -w256 Patchedsecdata0371.bin E81 1
nandpro.exe lpt: -w256 Patchedfiletable0E82By0E52.bin E82 1
or
nandpro.exe lpt: -w256 Patchedsecdata034F.bin E81 1
nandpro.exe lpt: -w256 Patchedfiletable0E82By0E49.bin E82 1
or
nandpro.exe lpt: -w256 Patchedsecdata0064.bin E81 1
nandpro.exe lpt: -w256 Patchedfiletable0E82By0B48.bin E82 1
or
nandpro.exe lpt: -w256 Patchedsecdata004B.bin E81 1
nandpro.exe lpt: -w256 Patchedfiletable0E82By0B2F.bin E82 1
or
nandpro.exe lpt: -w256 Patchedsecdata0043.bin E81 1
nandpro.exe lpt: -w256 Patchedfiletable0E82By0B27.bin E82 1

Press ENTER

Thanks for all your great work.
Logged
mabcom
Member
**
Posts: 27



View Profile
« Reply #448 on: January 11, 2010, 05:32:38 PM »



still lost none of the xbox360 restored hdd install function
if i try the Rc 5 extension findsecdata0.62 is alsno not showing alternative commands while i have more patchsecdata.bin

al i have to type is
findsecdata.exe falcon5005.bin -rc 5  right ?

any idea what can be wrong
i am still strugling

i have to banned xbox 360's and i am trying for several days to uncripple the hdd's
but every time i have no succes

one is the Falcon5005.bin and the second the Falcon5109a.bin
on the last i am a little bit afraid that it does not have enough info in the secdata to recover but the falcon5005.bin
should be fixable right ??

any idea what i can try ?
i restored both xboxen to the original flash and did run findsecdata again
so no patchings are done now see below
every time i can flash the boxes with the generated results but the xbox are still not allowing me to copy games to it



Microsoft Windows [versie 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. Alle rechten voorbehouden.

C:\Users\mabcom>cd...

C:\Users\mabcom>cd..

C:\Users>cd..

C:\>cd test

C:\test>findsecdata falcon5005a.bin

findsecdata v0.62 2009-12-09 by boby2pc
Controller version 1
Last filetable change: 0x78
ECC change: 0x78 Filetbl: 0x012D Secdata: 0x012C Timestamp: 33766001 2005-11-22
ECC change: 0x77 Filetbl: 0x012B Secdata: 0x012A Timestamp: 33766001 2005-11-22
ECC change: 0x76 Filetbl: 0x0129 Secdata: 0x0128 Timestamp: 3B7C65D1 2009-11-28
ECC change: 0x75 Filetbl: 0x0127 Secdata: 0x00F7 Timestamp: 3B5C7E80 2009-10-28

Checking secdata:

Searching for recommended

Extracting secdata:
secdata012C.bin
secdata012A.bin
secdata0128.bin
secdata00F7.bin

Extracting filetables:
filetable012D.bin
filetable012B.bin
filetable0129.bin
filetable0127.bin

Creating patched secdata:
Patchedsecdata012C.bin
Patchedsecdata012A.bin
Patchedsecdata0128.bin
Patchedsecdata00F7.bin

Creating patched filetables:
Patchedfiletable012DBy012D.bin
Patchedfiletable012DBy012B.bin
Patchedfiletable012DBy0127.bin

Use:
nandpro.exe lpt: -w16 Patchedsecdata00F7.bin 12C 1
nandpro.exe lpt: -w16 Patchedfiletable012DBy0127.bin 12D 1

Press ENTER


C:\test>findsecdata falcon5109a.bin

findsecdata v0.62 2009-12-09 by boby2pc
Controller version 1
Last filetable change: 0x4A
ECC change: 0x4A Filetbl: 0x0150 Secdata: 0x014F Timestamp: 3B688984 2009-11-08
ECC change: 0x46 Filetbl: 0x037E Secdata: 0x0378 Timestamp: 3B5C4DF2 2009-10-28
ECC change: 0x41 Filetbl: 0x0377 Secdata: 0x0390 Timestamp: 3B375DA6 2009-09-23

Checking secdata:
0390 containts not 0 values above offset 1024 or zeros below 1024 (overwritten)

Searching for recommended

Extracting secdata:
secdata014F.bin
secdata0378.bin

Extracting filetables:
filetable0150.bin
filetable037E.bin

Creating patched secdata:
Patchedsecdata014F.bin
Patchedsecdata0378.bin

Creating patched filetables:
Patchedfiletable0150By037E.bin

Use:
nandpro.exe lpt: -w16 Patchedsecdata0378.bin 14F 1
nandpro.exe lpt: -w16 Patchedfiletable0150By037E.bin 150 1

Press ENTER
Logged
tullid
Newbie
*
Posts: 1


View Profile
« Reply #449 on: January 12, 2010, 11:38:04 AM »

Hi Boby2pc,

Thanks for the great tool and you help!

Here is my dump, is it possible I cannot restore HDD functions?

C:\nandpro>FindSecData.exe nand3.bin

findsecdata v0.62 2009-12-09 by boby2pc
Controller version 1
Last filetable change: 0xAE
ECC change: 0xAE Filetbl: 0x0354 Secdata: 0x0353 Timestamp: 33766001 2005-11-22
ECC change: 0xAD Filetbl: 0x0352 Secdata: 0x0351 Timestamp: 33766001 2005-11-22
ECC change: 0xAC Filetbl: 0x0350 Secdata: 0x034F Timestamp: 33766001 2005-11-22
ECC change: 0xAB Filetbl: 0x034E Secdata: 0x034D Timestamp: 33766001 2005-11-22
ECC change: 0xAA Filetbl: 0x034C Secdata: 0x034B Timestamp: 33766001 2005-11-22
ECC change: 0xA9 Filetbl: 0x034A Secdata: 0x0349 Timestamp: 33766001 2005-11-22
ECC change: 0xA8 Filetbl: 0x0348 Secdata: 0x0347 Timestamp: 33766001 2005-11-22
ECC change: 0xA7 Filetbl: 0x0345 Secdata: 0x0344 Timestamp: 33766001 2005-11-22
ECC change: 0xA6 Filetbl: 0x0343 Secdata: 0x0342 Timestamp: 3B651047 2009-11-05
ECC change: 0x9D Filetbl: 0x007D Secdata: 0x0097 Timestamp: 3B5889E8 2009-10-24

Checking secdata:
0097 containts not 0 values above offset 1024 or zeros below 1024 (overwritten)

Searching for recommended

Extracting secdata:
secdata0353.bin
secdata0351.bin
secdata034F.bin
secdata034D.bin
secdata034B.bin
secdata0349.bin
secdata0347.bin
secdata0344.bin
secdata0342.bin

Extracting filetables:
filetable0354.bin
filetable0352.bin
filetable0350.bin
filetable034E.bin
filetable034C.bin
filetable034A.bin
filetable0348.bin
filetable0345.bin
filetable0343.bin

Creating patched secdata:
Patchedsecdata0353.bin
Patchedsecdata0351.bin
Patchedsecdata034F.bin
Patchedsecdata034D.bin
Patchedsecdata034B.bin
Patchedsecdata0349.bin
Patchedsecdata0347.bin
Patchedsecdata0344.bin
Patchedsecdata0342.bin

Creating patched filetables:
Patchedfiletable0354By0354.bin
Patchedfiletable0354By0352.bin
Patchedfiletable0354By0350.bin
Patchedfiletable0354By034E.bin
Patchedfiletable0354By034C.bin
Patchedfiletable0354By034A.bin
Patchedfiletable0354By0348.bin
Patchedfiletable0354By0345.bin

Use:

Old secdata.bin not found. Console might be not banned, already patched or secda
ta.bin overwritten.

Press ENTER

Thanks for your help!

-Dan


Logged
porsche_fanatic
Newbie
*
Posts: 6


View Profile
« Reply #450 on: January 14, 2010, 02:42:14 PM »

Guys, i am a total n00b to modding. and so i think i screwed up big time...

first i got banned on the 1st of January
so i made 2 dumps of my nand.bin, both were identical and without errors.
then i went on xbox-scene, followed the tutorial religiously but still haven't got my hdd functionality back

according to secdata scan, i had to zero down the block 0x0E03, which i did, but to no avail.
then i lost my patience, went berserk, and found another entry at 0x0CDC and zero'ed that too..

now i just ran findsecdata v0.62
and found this
Code:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\Deamon>findsecdata.exe nand.bin

findsecdata v0.62 2009-12-09 by boby2pc
Controller version 3
Last filetable change: 0x78
ECC change: 0x78 Filetbl: 0x0E0C Secdata: 0x032B Timestamp: 33766001 2005-11-22
ECC change: 0x77 Filetbl: 0x0E03 Secdata: 0x031B Timestamp: 3C216E84 2010-01-01
ECC change: 0x76 Filetbl: 0x0CDC Secdata: 0x01FB Timestamp: 3C216E84 2010-01-01
ECC change: 0x75 Filetbl: 0x0CD3 Secdata: 0x03C0 Timestamp: 3B5E4453 2009-10-30
ECC change: 0x70 Filetbl: 0x0E9A Secdata: 0x03B8 Timestamp: 3B5E4453 2009-10-30
ECC change: 0x6F Filetbl: 0x0E89 Secdata: 0x039E Timestamp: 3B5E4453 2009-10-30

Checking secdata:

Searching for recommended

Extracting secdata:
secdata032B.bin
secdata031B.bin
secdata01FB.bin
secdata03C0.bin
secdata03B8.bin
secdata039E.bin

Extracting filetables:
filetable0E0C.bin
filetable0E03.bin
filetable0CDC.bin
filetable0CD3.bin
filetable0E9A.bin
filetable0E89.bin

Creating patched secdata:
Patchedsecdata032B.bin
Patchedsecdata031B.bin
Patchedsecdata01FB.bin
Patchedsecdata03C0.bin
Patchedsecdata03B8.bin
Patchedsecdata039E.bin

Creating patched filetables:
Patchedfiletable0E0CBy0E0C.bin
Patchedfiletable0E0CBy0CDC.bin
Patchedfiletable0E0CBy0CD3.bin
Patchedfiletable0E0CBy0E9A.bin
Patchedfiletable0E0CBy0E89.bin

Use:
nandpro.exe lpt: -w512 Patchedsecdata01FB.bin E0B 1
nandpro.exe lpt: -w512 Patchedfiletable0E0CBy0CDC.bin E0C 1

Press ENTER

now do i have to flash my nand back on the 360 before using these commands. if so then how do i do that ??

BTW it took me 14 hours each to read my nand.bins, so i did not read it to check again..
Logged
boby2pc
Master Hacker
****
Posts: 169


View Profile
« Reply #451 on: January 14, 2010, 05:44:46 PM »

Guys, i am a total n00b to modding. and so i think i screwed up big time...

first i got banned on the 1st of January
so i made 2 dumps of my nand.bin, both were identical and without errors.
then i went on xbox-scene, followed the tutorial religiously but still haven't got my hdd functionality back

according to secdata scan, i had to zero down the block 0x0E03, which i did, but to no avail.
then i lost my patience, went berserk, and found another entry at 0x0CDC and zero'ed that too..

now i just ran findsecdata v0.62
and found this
Code:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\Deamon>findsecdata.exe nand.bin

findsecdata v0.62 2009-12-09 by boby2pc
Controller version 3
Last filetable change: 0x78
ECC change: 0x78 Filetbl: 0x0E0C Secdata: 0x032B Timestamp: 33766001 2005-11-22
ECC change: 0x77 Filetbl: 0x0E03 Secdata: 0x031B Timestamp: 3C216E84 2010-01-01
ECC change: 0x76 Filetbl: 0x0CDC Secdata: 0x01FB Timestamp: 3C216E84 2010-01-01
ECC change: 0x75 Filetbl: 0x0CD3 Secdata: 0x03C0 Timestamp: 3B5E4453 2009-10-30
ECC change: 0x70 Filetbl: 0x0E9A Secdata: 0x03B8 Timestamp: 3B5E4453 2009-10-30
ECC change: 0x6F Filetbl: 0x0E89 Secdata: 0x039E Timestamp: 3B5E4453 2009-10-30

Checking secdata:

Searching for recommended

Extracting secdata:
secdata032B.bin
secdata031B.bin
secdata01FB.bin
secdata03C0.bin
secdata03B8.bin
secdata039E.bin

Extracting filetables:
filetable0E0C.bin
filetable0E03.bin
filetable0CDC.bin
filetable0CD3.bin
filetable0E9A.bin
filetable0E89.bin

Creating patched secdata:
Patchedsecdata032B.bin
Patchedsecdata031B.bin
Patchedsecdata01FB.bin
Patchedsecdata03C0.bin
Patchedsecdata03B8.bin
Patchedsecdata039E.bin

Creating patched filetables:
Patchedfiletable0E0CBy0E0C.bin
Patchedfiletable0E0CBy0CDC.bin
Patchedfiletable0E0CBy0CD3.bin
Patchedfiletable0E0CBy0E9A.bin
Patchedfiletable0E0CBy0E89.bin

Use:
nandpro.exe lpt: -w512 Patchedsecdata01FB.bin E0B 1
nandpro.exe lpt: -w512 Patchedfiletable0E0CBy0CDC.bin E0C 1

Press ENTER

now do i have to flash my nand back on the 360 before using these commands. if so then how do i do that ??

BTW it took me 14 hours each to read my nand.bins, so i did not read it to check again..
make short dump as descríbed in readme, run findsecdata with -rc 5 option and use pair of commands which refers to block 3C0. Im on vacation and cant help more now
Logged
Teratani360
Newbie
*
Posts: 1


View Profile
« Reply #452 on: January 17, 2010, 05:43:33 AM »

Hi, I run program findsecdata 0.62, but it can't found the right patch so I'll post u findsecdata result berfore I attempt random pathces:

a nand1.bin [-ots] [-osc]

findsecdata v0.62 2009-12-09 by boby2pc
Controller version 3
Last filetable change: 0x89
ECC change: 0x89 Filetbl: 0x0AFD Secdata: 0x001C Timestamp: 33766001 2005-11-22
ECC change: 0x88 Filetbl: 0x0EDC Secdata: 0x03F4 Timestamp: 33766001 2005-11-22
ECC change: 0x87 Filetbl: 0x0EB5 Secdata: 0x03D4 Timestamp: 33766001 2005-11-22
ECC change: 0x86 Filetbl: 0x0E9C Secdata: 0x037C Timestamp: 33766001 2005-11-22
ECC change: 0x85 Filetbl: 0x0E55 Secdata: 0x0374 Timestamp: 33766001 2005-11-22
ECC change: 0x84 Filetbl: 0x0E4C Secdata: 0x0364 Timestamp: 33766001 2005-11-22
ECC change: 0x83 Filetbl: 0x0E3D Secdata: 0x035C Timestamp: 33766001 2005-11-22
ECC change: 0x82 Filetbl: 0x0E34 Secdata: 0x034C Timestamp: 33766001 2005-11-22
ECC change: 0x81 Filetbl: 0x0E25 Secdata: 0x0344 Timestamp: 33766001 2005-11-22
ECC change: 0x80 Filetbl: 0x0E1C Secdata: 0x0334 Timestamp: 33766001 2005-11-22
ECC change: 0x7F Filetbl: 0x0E0D Secdata: 0x032C Timestamp: 33766001 2005-11-22
ECC change: 0x7E Filetbl: 0x0DFC Secdata: 0x0314 Timestamp: 33766001 2005-11-22
ECC change: 0x7D Filetbl: 0x0DCD Secdata: 0x02EC Timestamp: 33766001 2005-11-22
ECC change: 0x7C Filetbl: 0x0D5C Secdata: 0x0234 Timestamp: 33766001 2005-11-22
ECC change: 0x7B Filetbl: 0x0BBD Secdata: 0x00DC Timestamp: 33766001 2005-11-22
ECC change: 0x7A Filetbl: 0x0BAC Secdata: 0x00C4 Timestamp: 33766001 2005-11-22
ECC change: 0x79 Filetbl: 0x0B05 Secdata: 0x0024 Timestamp: 33766001 2005-11-22

Checking secdata:

Searching for recommended

Extracting secdata:
secdata001C.bin
secdata03F4.bin
secdata03D4.bin
secdata037C.bin
secdata0374.bin
secdata0364.bin
secdata035C.bin
secdata034C.bin
secdata0344.bin
secdata0334.bin
secdata032C.bin
secdata0314.bin
secdata02EC.bin
secdata0234.bin
secdata00DC.bin
secdata00C4.bin
secdata0024.bin

Extracting filetables:
filetable0AFD.bin
filetable0EDC.bin
filetable0EB5.bin
filetable0E9C.bin
filetable0E55.bin
filetable0E4C.bin
filetable0E3D.bin
filetable0E34.bin
filetable0E25.bin
filetable0E1C.bin
filetable0E0D.bin
filetable0DFC.bin
filetable0DCD.bin
filetable0D5C.bin
filetable0BBD.bin
filetable0BAC.bin
filetable0B05.bin

Creating patched secdata:
Patchedsecdata001C.bin
Patchedsecdata03F4.bin
Patchedsecdata03D4.bin
Patchedsecdata037C.bin
Patchedsecdata0374.bin
Patchedsecdata0364.bin
Patchedsecdata035C.bin
Patchedsecdata034C.bin
Patchedsecdata0344.bin
Patchedsecdata0334.bin
Patchedsecdata032C.bin
Patchedsecdata0314.bin
Patchedsecdata02EC.bin
Patchedsecdata0234.bin
Patchedsecdata00DC.bin
Patchedsecdata00C4.bin
Patchedsecdata0024.bin

Creating patched filetables:
Patchedfiletable0AFDBy0AFD.bin
Patchedfiletable0AFDBy0EDC.bin
Patchedfiletable0AFDBy0EB5.bin
Patchedfiletable0AFDBy0E9C.bin
Patchedfiletable0AFDBy0E55.bin
Patchedfiletable0AFDBy0E4C.bin
Patchedfiletable0AFDBy0E3D.bin
Patchedfiletable0AFDBy0E34.bin
Patchedfiletable0AFDBy0E25.bin
Patchedfiletable0AFDBy0E1C.bin
Patchedfiletable0AFDBy0E0D.bin
Patchedfiletable0AFDBy0DFC.bin
Patchedfiletable0AFDBy0DCD.bin
Patchedfiletable0AFDBy0D5C.bin
Patchedfiletable0AFDBy0BBD.bin
Patchedfiletable0AFDBy0BAC.bin
Patchedfiletable0AFDBy0B05.bin

Use:

Old secdata.bin not found. Console might be not banned, already patched or secdata.bin overwritten.

Press ENTER


All timestamps are the same...If I open all of these with hex workshop, the first, the last and the next last are differents each other, then all of the other one are identical. I've seen just a couple of row address.

Any chances?

Thanks
Logged
porsche_fanatic
Newbie
*
Posts: 6


View Profile
« Reply #453 on: January 17, 2010, 06:20:42 AM »

make short dump as descríbed in readme, run findsecdata with -rc 5 option and use pair of commands which refers to block 3C0. Im on vacation and cant help more now

thanks for the assist.. As i speak, I'm reflashing one of my nand.bin on the xbox, then I'll run those commands and post the results..
enjoy your vacation.. Grin
Logged
boby2pc
Master Hacker
****
Posts: 169


View Profile
« Reply #454 on: January 17, 2010, 10:24:36 AM »

hello..

i dumped my nand 3 times using usb interface.. all 3 were identical..

ran findsecdata and this is what i got:


C:\Users\CH@SE\Desktop\n>findsecdata.exe nand.bin

findsecdata v0.62 2009-12-09 by boby2pc
Controller version 1
Last filetable change: 0x40
ECC change: 0x40 Filetbl: 0x01AC Secdata: 0x01AB Timestamp: 3B670D43 2009-11-07
ECC change: 0x3F Filetbl: 0x01AA Secdata: 0x0292 Timestamp: 3B610E32 2009-11-01
ECC change: 0x37 Filetbl: 0x0291 Secdata: 0x01BD Timestamp: 33766001 2005-11-22
ECC change: 0x33 Filetbl: 0x01BC Secdata: 0x02A5 Timestamp: 33766001 2005-11-22

Checking secdata:
02A5 containts not 0 values above offset 1024 or zeros below 1024 (overwritten)

Searching for recommended

Extracting secdata:
secdata01AB.bin
secdata0292.bin
secdata01BD.bin

Extracting filetables:
filetable01AC.bin
filetable01AA.bin
filetable0291.bin

Creating patched secdata:
Patchedsecdata01AB.bin
Patchedsecdata0292.bin
Patchedsecdata01BD.bin

Creating patched filetables:
Patchedfiletable01ACBy01AA.bin
Patchedfiletable01ACBy0291.bin

Use:
nandpro.exe lpt: -w16 Patchedsecdata0292.bin 1AB 1
nandpro.exe lpt: -w16 Patchedfiletable01ACBy01AA.bin 1AC 1

Press ENTER


flashed nand by using the following command :

nandpro usb: -w16 Patchedsecdata0292.bin 1AB 1

flash took less than 1 second Huh

now when i try to install game to hdd, it wont let me..

what have I done wrong ??

thanks

You should use pair of commands:
nandpro.exe lpt: -w16 Patchedsecdata0292.bin 1AB 1
nandpro.exe lpt: -w16 Patchedfiletable01ACBy01AA.bin 1AC 1
Logged
bidomo
Master Hacker
****
Posts: 402


Bee Duh! mo


View Profile
« Reply #455 on: January 17, 2010, 04:02:46 PM »

Well, not a noob question, since my banned consoles (2 consoles from 2007-2008 banwaves), are now with XBR, so haven't had to run findsecdata.

My friend's console is giving some trouble with corrupting gamer profiles, but HDD install is not disabled, at least that's what he told me...

This console has been banned since November 2008 (gears of war 2), and I would like to know if we can avoid the profile corruption...
The console is with me right now (Rrod, X-clamp fix till I get to someone who does reballing or till I buy equipment), and I'm gonna check if it really does install games to HD and dump the nand.
Logged

porsche_fanatic
Newbie
*
Posts: 6


View Profile
« Reply #456 on: January 19, 2010, 07:25:13 AM »

Quote
thanks for the assist.. As i speak, I'm reflashing one of my nand.bin on the xbox, then I'll run those commands and post the results..
enjoy your vacation.. Grin

When i flashed, it started giving a lot of error 0's, so i stopped it, rechecked and resoldered everything, but still getting error 0 in writing back the nand. and now i am stuck with E79 !!!! Huh Huh
« Last Edit: January 19, 2010, 07:31:28 AM by porsche_fanatic » Logged
bidomo
Master Hacker
****
Posts: 402


Bee Duh! mo


View Profile
« Reply #457 on: January 19, 2010, 03:54:16 PM »

Quote
thanks for the assist.. As i speak, I'm reflashing one of my nand.bin on the xbox, then I'll run those commands and post the results..
enjoy your vacation.. Grin

When i flashed, it started giving a lot of error 0's, so i stopped it, rechecked and resoldered everything, but still getting error 0 in writing back the nand. and now i am stuck with E79 !!!! Huh Huh

Check your wiring, is flashconfig correct?
also, you may really want to stop bittorrent, ares, limewire, irc, or whatever uses memory actively, also, close messenger...

I had a bad dump, just one, and I'm oretty sure is because of this, game error 250 from 200 to 3FF, retried with all closed, all worked fine
Logged

leon1360
Newbie
*
Posts: 1


View Profile
« Reply #458 on: January 19, 2010, 06:44:59 PM »

hi everyone
i have a problem mi hdd install dont works after i put the commands
i tried all the comands below but nothing happens

E:\finsecdata>findsecdata.exe ahorati.bin -rc 5

findsecdata v0.62 2009-12-09 by boby2pc
Relocations found:
Page: 218 -> 232
Controller version 3
Last filetable change: 0x7A
ECC change: 0x7A Filetbl: 0x0D13 Secdata: 0x0232 Timestamp: 3B7C96E5 2009-11-28
ECC change: 0x79 Filetbl: 0x0D0A Secdata: 0x0222 Timestamp: 3B7C96E5 2009-11-28
ECC change: 0x78 Filetbl: 0x0CFB Secdata: 0x021A Timestamp: 3B7C96E5 2009-11-28
ECC change: 0x77 Filetbl: 0x0CE2 Secdata: 0x004A Timestamp: 33766001 2005-11-22
ECC change: 0x76 Filetbl: 0x0B13 Secdata: 0x0032 Timestamp: 33766001 2005-11-22
ECC change: 0x75 Filetbl: 0x0B0A Secdata: 0x0022 Timestamp: 33766001 2005-11-22
ECC change: 0x74 Filetbl: 0x0ECB Secdata: 0x03EA Timestamp: 33766001 2005-11-22
ECC change: 0x73 Filetbl: 0x0EC2 Secdata: 0x03DA Timestamp: 33766001 2005-11-22
ECC change: 0x72 Filetbl: 0x0EB3 Secdata: 0x03D2 Timestamp: 33766001 2005-11-22
ECC change: 0x71 Filetbl: 0x0E3A Secdata: 0x0352 Timestamp: 33766001 2005-11-22
ECC change: 0x70 Filetbl: 0x0E2B Secdata: 0x034A Timestamp: 33766001 2005-11-22
ECC change: 0x6F Filetbl: 0x0E22 Secdata: 0x033A Timestamp: 33766001 2005-11-22
ECC change: 0x6E Filetbl: 0x0E13 Secdata: 0x0332 Timestamp: 33766001 2005-11-22
ECC change: 0x6D Filetbl: 0x0E0A Secdata: 0x0322 Timestamp: 33766001 2005-11-22
ECC change: 0x6C Filetbl: 0x0DFB Secdata: 0x031A Timestamp: 33766001 2005-11-22
ECC change: 0x6B Filetbl: 0x0DF2 Secdata: 0x02EA Timestamp: 3B7C96E5 2009-11-28
ECC change: 0x6A Filetbl: 0x0D5B Secdata: 0x027A Timestamp: 3B7C96E5 2009-11-28

Checking secdata:

Searching for recommended

Extracting secdata:
secdata0232.bin
secdata0222.bin
secdata021A.bin
secdata004A.bin
secdata0032.bin
secdata0022.bin
secdata03EA.bin
secdata03DA.bin
secdata03D2.bin
secdata0352.bin
secdata034A.bin
secdata033A.bin
secdata0332.bin
secdata0322.bin
secdata031A.bin
secdata02EA.bin
secdata027A.bin

Extracting filetables:
filetable0D13.bin
filetable0D0A.bin
filetable0CFB.bin
filetable0CE2.bin
filetable0B13.bin
filetable0B0A.bin
filetable0ECB.bin
filetable0EC2.bin
filetable0EB3.bin
filetable0E3A.bin
filetable0E2B.bin
filetable0E22.bin
filetable0E13.bin
filetable0E0A.bin
filetable0DFB.bin
filetable0DF2.bin
filetable0D5B.bin

Creating patched secdata:
Patchedsecdata0232.bin
Patchedsecdata0222.bin
Patchedsecdata021A.bin
Patchedsecdata004A.bin
Patchedsecdata0032.bin
Patchedsecdata0022.bin
Patchedsecdata03EA.bin
Patchedsecdata03DA.bin
Patchedsecdata03D2.bin
Patchedsecdata0352.bin
Patchedsecdata034A.bin
Patchedsecdata033A.bin
Patchedsecdata0332.bin
Patchedsecdata0322.bin
Patchedsecdata031A.bin
Patchedsecdata02EA.bin
Patchedsecdata027A.bin

Creating patched filetables:
Patchedfiletable0D13By0D0A.bin
Patchedfiletable0D13By0CFB.bin
Patchedfiletable0D13By0CE2.bin
Patchedfiletable0D13By0B13.bin
Patchedfiletable0D13By0B0A.bin
Patchedfiletable0D13By0ECB.bin
Patchedfiletable0D13By0EC2.bin
Patchedfiletable0D13By0EB3.bin
Patchedfiletable0D13By0E3A.bin
Patchedfiletable0D13By0E2B.bin
Patchedfiletable0D13By0E22.bin
Patchedfiletable0D13By0E13.bin
Patchedfiletable0D13By0E0A.bin
Patchedfiletable0D13By0DFB.bin
Patchedfiletable0D13By0DF2.bin
Patchedfiletable0D13By0D5B.bin

Use:
nandpro.exe lpt: -w256 Patchedsecdata0222.bin D12 1
nandpro.exe lpt: -w256 Patchedfiletable0D13By0D0A.bin D13 1
or
nandpro.exe lpt: -w256 Patchedsecdata021A.bin D12 1
nandpro.exe lpt: -w256 Patchedfiletable0D13By0CFB.bin D13 1
or
nandpro.exe lpt: -w256 Patchedsecdata02EA.bin D12 1
nandpro.exe lpt: -w256 Patchedfiletable0D13By0DF2.bin D13 1
or
nandpro.exe lpt: -w256 Patchedsecdata027A.bin D12 1
nandpro.exe lpt: -w256 Patchedfiletable0D13By0D5B.bin D13 1
or
nandpro.exe lpt: -w256 Patchedsecdata004A.bin D12 1
nandpro.exe lpt: -w256 Patchedfiletable0D13By0CE2.bin D13 1

Press ENTER

i dont know what to do now
help please
thank you
« Last Edit: January 19, 2010, 06:59:39 PM by leon1360 » Logged
msidot
Newbie
*
Posts: 2


View Profile
« Reply #459 on: January 22, 2010, 12:54:35 AM »

hi all, do i need to make full nand dump to use findsecdata? last time i try to make full nand dump of 512mb jasper it's take 18 hours. after i read the readme in findsecdata " now for 256MB and 512MB Jaspers is only needed dump of 0x600 blocks ". Today, my friend come to me, he asked my help to restore his 256 jasper....i don't want to wait for 9 hours dump.....
Logged
Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 »
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC

Valid XHTML 1.0! Valid CSS! Dilber MC Theme by HarzeM