Tieri
Newbie
Posts: 7
|
 |
« Reply #360 on: December 29, 2010, 04:32:39 PM » |
|
Hacket a WD2500BEKT manufactured 5 dec. 2010. I was first using HDDHackr v1.25 from xbox-scene. Had the "bad/wrong model number offset!" error. Then I found this thread and tried HDDHackr v1.25 Build 20101114 and it worked like a charm. I am now a broud owner of a 250GB Xbox HDD for 46€! Thank you for this nice software!
|
|
|
|
|
Logged
|
|
|
|
nite82hawk
Newbie
Posts: 2
|
|
« Reply #361 on: December 31, 2010, 04:11:23 AM » |
|
HELP! After I say YES to "Do you want to flash XBOX360 compatible firmware?' I get..
Check Status 0x50 - Error!
Western Digital Vendor Intro failed on port 0xFF00
Make sure you have connected Western Digital Scorpio series Hard Drive.
If you choose to resend the command you should turn the drive off and on after you pressed "Yes".
Do you want to resend the command until the drive responds (Y/N)?
So I hit "Y" then I get
"Press ESC key to abort!"
Status: 0x51
Can't send vendor specific WD flash intro to HDD!
C:\>
I have a WD2500BEVT HD made in 8/17/10. Also, when I type "hddhackr" and hit enter, it takes like 15-20 minutes for the comp to list all the drives. It recognizes the WD right away but I can't choose it until the whole process is done but then it tells me that there is an error when I try to flash it. Please help me!
Another thing, when I made the boot usb drive, the tutorial I was reading said to make it a "FAT" drive but I was only given the choice to make it a "FAT32" drive, is that a problem?? Thank you.
|
|
|
|
« Last Edit: December 31, 2010, 01:33:47 PM by nite82hawk »
|
Logged
|
|
|
|
nite82hawk
Newbie
Posts: 2
|
|
« Reply #362 on: December 31, 2010, 03:21:08 PM » |
|
Nevermind. I tried it on a different computer and it worked fine now. Thanks.
|
|
|
|
|
Logged
|
|
|
|
prodigy007
Newbie
Posts: 1
|
|
« Reply #363 on: January 02, 2011, 02:47:36 PM » |
|
I need a wd5000bevt undo.bin if anyone has theirs laying around please.
|
|
|
|
|
Logged
|
|
|
|
betorollo
Newbie
Posts: 1
|
|
« Reply #364 on: January 04, 2011, 08:56:48 AM » |
|
hi guys i've just bought on ebay a 250gb WD2500BEVT manufactured 05 aug 2010.
i can't get hddhackr works.. i've already done this other times with others hard disks but with this in the end after he creates the partitions it said me "bad/wrong serial number offset" and return to a:
i never seen this error and i didn't found nothing on the internet.. what can be? i can send the undo.bin of the drive if it can be usefull.. thanks guys, i don't know what to do..
|
|
|
|
|
Logged
|
|
|
|
|
Andy_91
|
|
« Reply #365 on: January 06, 2011, 02:47:46 PM » |
|
do you have to use a pc or can use this on a laptop cause ive only got a laptop my hd is wd1200bevs just waiting on a memory stick
|
|
|
|
|
Logged
|
|
|
|
stunty
Newbie
Posts: 2
|
|
« Reply #366 on: January 07, 2011, 07:31:18 PM » |
|
I'm having some issues and was hoping someone could help me work out what I'm doing wrong. I'm following the guide here: http://digiex.net/guides-reviews/console-guides/xbox-360-guides/3152-xbox-360-how-hack-250gb-sata-drive-work-xbox-360-xbox-360-slim.htmlI'm attempting to flash a WD Scorpio Blue: WD2500BEVT-22A23T0 The manufacture date is 18 NOV 2010 When I try to run HDDHackr from the USB stick I get the errors Check DRQ - Error! No ATA identify possible No ATA devices present My computer can see the drive, even format it if I want to, but HDDhackr won't recognize it. I've got a P4S800D-E Asus Mobo, and I believe I've set all the possible SATA settings correctly. The manual (with available BIOS settings) is here: http://joule.bu.edu/~hazen/LinuxCluster/e1381_p4s800d-e_deluxe.pdfThere are two SATA-related settings and I've tried every possible combination of turning them on and off and switching between the four SATA ports on my Mobo. So far no luck. Am I missing a setting somewhere? Does my Bios/MB just not support this kind of thing? Do I just need to wait for a newer version of HDDHackr? Thanks in advance for any help. |
|
|
|
|
Logged
|
|
|
|
benckc611
Newbie
Posts: 2
|
|
« Reply #367 on: January 08, 2011, 05:04:22 AM » |
|
hi i try to make my usb to a bootable usb by the software " Bootable USB Drive Creator Tool "
but an error msg came up
"Premission denied. The aministrator rights are required to run this tool."
in fact i am the aministrator of my computer
pls help and tell me what to do
thank you
|
|
|
|
|
Logged
|
|
|
|
|
Gazcoigne
|
|
« Reply #368 on: January 08, 2011, 09:06:27 AM » |
|
right click the exe and choose run as administrator if you are in windows 7
|
|
|
|
|
Logged
|
|
|
|
benckc611
Newbie
Posts: 2
|
|
« Reply #369 on: January 08, 2011, 06:18:13 PM » |
|
right click the exe and choose run as administrator if you are in windows 7
oic thanks very much |
|
|
|
|
Logged
|
|
|
|
seanraz
Newbie
Posts: 1
|
|
« Reply #370 on: January 09, 2011, 01:36:46 AM » |
|
hey I have a question will a Seagate Momentus 5400.2 work with hddhackr?
|
|
|
|
|
Logged
|
|
|
|
fubar569
Newbie
Posts: 7
|
|
« Reply #371 on: January 09, 2011, 05:17:39 AM » |
|
hey I have a question will a Seagate Momentus 5400.2 work with hddhackr?
No. See first post. |
|
|
|
« Last Edit: January 09, 2011, 05:22:25 AM by fubar569 »
|
Logged
|
|
|
|
fubar569
Newbie
Posts: 7
|
|
« Reply #372 on: January 09, 2011, 05:21:54 AM » |
|
Also, i can personally confirm it WILL WORK with the WD VELOCIRAPTOR series.
Because i Just got done stuffing one in my Xbox 360 Slim.
Shows up as an official MS 120gb drive. except about an average of 20% faster across the board so far. sometimes faster.
it can be done. i have the walkthrough mostly finished. the basics are you need to solder in a wire to the existing factory SATA power connector (pins 13 14 & 15), tap that into a 12v source (DVD drive works) and then reassemble using only 1/2 the rubber boot.
cooling mods required. I'm using a 60x60x25 maglev fan from sunon on a modified HDD Bay cover. works very well.
THANKS MODFREAKZ. fo realz.
|
|
|
|
|
Logged
|
|
|
|
Siv
Newbie
Posts: 1
|
|
« Reply #373 on: January 09, 2011, 09:24:42 AM » |
|
I have a question. Is it possible to create 2 X 250Gb partitions on a 500Gb drive for the expandable Xbox 360 slim slot and be recognised in the memory of the xbox simultaneously.
|
|
|
|
« Last Edit: January 09, 2011, 09:31:02 AM by Siv »
|
Logged
|
|
|
|
|
Andy_91
|
|
« Reply #374 on: January 09, 2011, 12:20:18 PM » |
|
I'm having some issues and was hoping someone could help me work out what I'm doing wrong. I'm following the guide here: http://digiex.net/guides-reviews/console-guides/xbox-360-guides/3152-xbox-360-how-hack-250gb-sata-drive-work-xbox-360-xbox-360-slim.htmlI'm attempting to flash a WD Scorpio Blue: WD2500BEVT-22A23T0 The manufacture date is 18 NOV 2010 When I try to run HDDHackr from the USB stick I get the errors Check DRQ - Error! No ATA identify possible No ATA devices present My computer can see the drive, even format it if I want to, but HDDhackr won't recognize it. I've got a P4S800D-E Asus Mobo, and I believe I've set all the possible SATA settings correctly. The manual (with available BIOS settings) is here: http://joule.bu.edu/~hazen/LinuxCluster/e1381_p4s800d-e_deluxe.pdfThere are two SATA-related settings and I've tried every possible combination of turning them on and off and switching between the four SATA ports on my Mobo. So far no luck. Am I missing a setting somewhere? Does my Bios/MB just not support this kind of thing? Do I just need to wait for a newer version of HDDHackr? Thanks in advance for any help. same happened to me check you've changed your bios i had to disable everything that was abled then press the number my drive n it worked |
|
|
|
|
Logged
|
|
|
|
fubar569
Newbie
Posts: 7
|
|
« Reply #375 on: January 09, 2011, 03:11:28 PM » |
|
I have a question. Is it possible to create 2 X 250Gb partitions on a 500Gb drive for the expandable Xbox 360 slim slot and be recognised in the memory of the xbox simultaneously.
no |
|
|
|
|
Logged
|
|
|
|
|
Gazcoigne
|
|
« Reply #376 on: January 09, 2011, 05:28:13 PM » |
|
Also, i can personally confirm it WILL WORK with the WD VELOCIRAPTOR series.
Because i Just got done stuffing one in my Xbox 360 Slim.
Shows up as an official MS 120gb drive. except about an average of 20% faster across the board so far. sometimes faster.
it can be done. i have the walkthrough mostly finished. the basics are you need to solder in a wire to the existing factory SATA power connector (pins 13 14 & 15), tap that into a 12v source (DVD drive works) and then reassemble using only 1/2 the rubber boot.
cooling mods required. I'm using a 60x60x25 maglev fan from sunon on a modified HDD Bay cover. works very well.
THANKS MODFREAKZ. fo realz.
defo would like to see pics and a breakdown sounds good. |
|
|
|
|
Logged
|
|
|
|
fubar569
Newbie
Posts: 7
|
|
« Reply #377 on: January 09, 2011, 06:20:48 PM » |
|
Also, i can personally confirm it WILL WORK with the WD VELOCIRAPTOR series.
Because i Just got done stuffing one in my Xbox 360 Slim.
Shows up as an official MS 120gb drive. except about an average of 20% faster across the board so far. sometimes faster.
it can be done. i have the walkthrough mostly finished. the basics are you need to solder in a wire to the existing factory SATA power connector (pins 13 14 & 15), tap that into a 12v source (DVD drive works) and then reassemble using only 1/2 the rubber boot.
cooling mods required. I'm using a 60x60x25 maglev fan from sunon on a modified HDD Bay cover. works very well.
THANKS MODFREAKZ. fo realz.
defo would like to see pics and a breakdown sounds good. I can upload it to my personal webspace and also make a crude website to display it. i'll get on that and post the link later for you. |
|
|
|
|
Logged
|
|
|
|
fubar569
Newbie
Posts: 7
|
|
« Reply #378 on: January 09, 2011, 08:43:31 PM » |
|
|
|
|
|
|
Logged
|
|
|
|
stunty
Newbie
Posts: 2
|
|
« Reply #379 on: January 12, 2011, 03:01:26 AM » |
|
I'm having some issues and was hoping someone could help me work out what I'm doing wrong. I'm following the guide here: http://digiex.net/guides-reviews/console-guides/xbox-360-guides/3152-xbox-360-how-hack-250gb-sata-drive-work-xbox-360-xbox-360-slim.htmlI'm attempting to flash a WD Scorpio Blue: WD2500BEVT-22A23T0 The manufacture date is 18 NOV 2010 When I try to run HDDHackr from the USB stick I get the errors Check DRQ - Error! No ATA identify possible No ATA devices present My computer can see the drive, even format it if I want to, but HDDhackr won't recognize it. I've got a P4S800D-E Asus Mobo, and I believe I've set all the possible SATA settings correctly. The manual (with available BIOS settings) is here: http://joule.bu.edu/~hazen/LinuxCluster/e1381_p4s800d-e_deluxe.pdfThere are two SATA-related settings and I've tried every possible combination of turning them on and off and switching between the four SATA ports on my Mobo. So far no luck. Am I missing a setting somewhere? Does my Bios/MB just not support this kind of thing? Do I just need to wait for a newer version of HDDHackr? Thanks in advance for any help. same happened to me check you've changed your bios i had to disable everything that was abled then press the number my drive n it worked With the exact same motherboard/bios? |
|
|
|
|
Logged
|
|
|
|
|
