Samsung ts-h943 and jungle flasher probs

[en3rmax]

Hi there i'm trying to flash my samsung ts-h943 with jungle flasher, i've never done it this way before i normally use iprep, i'm having some problems getting the drive detected in jungle flasher the drive had firmware ixtreme 1.4 on it at the moment, i can see the drive connected to my sata port in the bios but when i boot into windows i run the unlock disc for 30 seconds then run jungle flasher but when i select the different ports i can't see my sammy connected to the port, i'm running windows vista sp1,

[en3rmax]

I've managed to the flash the ts-h943 with iprep now, but i would still like to know what the problem was with jungle flasher, i've flashed hitachi drives with no probs using jungle flasher but this was my first time using it with a ts-h943

[TeckniX]

I know this is a bit old, but the Samsung drive are semi-tricky.

You need to look inside the manual_installation folder and look for the readme file. Follow it to a T and you'll flash samsung drives in no-time!