|
m60_maniac
|
 |
« on: February 12, 2009, 04:36:55 PM » |
|
1st off, im not a noob at flashing. ive flashed over 30 odd liteons and 5 today but this one is being odd.
i did everything the same way i normaly do, read the key and files, make the ix15.bin file in jungleflasher and load it onto my flash drive. boot from usb into dos, erase and flash. problem is, i got to write and it hung on writing bank 0.
ive had a look around for answers, ive checked the dummy.bin file ect, done the l-o-erase 10 times till i got status FF72, even 20 times. still the same result. ive updated my via drivers to 530c, used my other via card to see if it was that, powered it by the 360 and my xtractor, different usb drives.
the files i have are fine, ive had to spoof a benq into it till i resolve this as the guy was coming to collect it. thatt works fine and i was playing cod waw on it so i know the files are good.
what could it be?
thanks chaps
|
|
|
|
|
Logged
|
|
|
|
|
turny
|
|
« Reply #1 on: February 12, 2009, 05:38:56 PM » |
|
ive updated my via drivers to 530c ,quote,
I thought all via drivers had to be disabled or removed and jungleflasher sorts the via card out, thats how my set up works it freezes otherwise on my system anyway,so why dont you try that first , the trouble is what works one week may not work the next week thats the way it goes.
|
|
|
|
|
Logged
|
|
|
|
|
gigabite
|
|
« Reply #2 on: February 12, 2009, 07:46:46 PM » |
|
^^ I thought all via drivers had to be disabled or removed and jungleflasher sorts the via card out, thats how my set up works it freezes otherwise on my system anyway,so why dont you try that first , the trouble is what works one week may not work the next week thats the way it goes. boot from usb into dos, Have you tired replacing Dosflash.exe and Dosflash.typ ? Also, back-up the memory stick and only have dosflash and the lite-on hacked firmware on it...then try (just in the root of the memory stick also) gigabite |
|
|
|
|
Logged
|
 .ISO - he's a wannabe ... feel part of "t3h sc33n" yet ? QQ coming 2009  |
|
|
|
m60_maniac
|
|
« Reply #3 on: February 12, 2009, 08:36:24 PM » |
|
so just the dosflash.exe, dosflash.typ and liteon firmware? would have though i would need l-o-erase too? will have a go in the morning when i get up, its 1.30 am  thanks chaps |
|
|
|
|
Logged
|
|
|
|
|
gigabite
|
|
« Reply #4 on: February 12, 2009, 10:38:20 PM » |
|
well yeah sure you can have liteon erase on there if you want (oh and make sure you do the tray thing right...obviously you would because you said you have done them before  ) gigabite |
|
|
|
|
Logged
|
.ISO - he's a wannabe ... feel part of "t3h sc33n" yet ? QQ coming 2009 |
|
|
|
Arakon
|
|
« Reply #5 on: February 13, 2009, 12:12:15 AM » |
|
...the tray position doesn't matter at all for flashing.
|
|
|
|
|
Logged
|
I do NOT give support by email, PM, ICQ or whatever. Anyone annoying me that way will have his balls removed. With a rusty butterknife. Slowly. And I'll enjoy doing it.
|
|
|
|
m60_maniac
|
|
« Reply #6 on: February 13, 2009, 04:30:17 AM » |
|
ok ill give it a go now  edit: just tried and still no joy. ive also just flashed another liteon and that one worked perfectly but the other one still wont go past writing bank 0 :S off topic, akron i love your sig, i need something like that on 360iso |
|
|
|
« Last Edit: February 13, 2009, 05:20:52 AM by m60_maniac »
|
Logged
|
|
|
|
|
gigabite
|
|
« Reply #7 on: February 13, 2009, 09:27:27 PM » |
|
have you tried it with jungleflasher in windows ?
gigabite
|
|
|
|
|
Logged
|
.ISO - he's a wannabe ... feel part of "t3h sc33n" yet ? QQ coming 2009 |
|
|
|
m60_maniac
|
|
« Reply #8 on: February 15, 2009, 07:18:11 PM » |
|
sorry was at a party yea tried and it freezes, if i disable it/uninstal the drivers it dont get detected. also tried onboard and no joy either, though i might try on board with jungle |
|
|
|
|
Logged
|
|
|
|
|
gigabite
|
|
« Reply #9 on: February 15, 2009, 11:37:43 PM » |
|
how about dosflash 32 ??
gigabite
|
|
|
|
|
Logged
|
.ISO - he's a wannabe ... feel part of "t3h sc33n" yet ? QQ coming 2009 |
|
|
|
m60_maniac
|
|
« Reply #10 on: February 16, 2009, 07:02:21 AM » |
|
its not the program that freezes, its windows so dos 32 wont work either
|
|
|
|
|
Logged
|
|
|
|
|
gigabite
|
|
« Reply #11 on: February 16, 2009, 08:21:14 AM » |
|
well I always use dos personally, sounds like you do (or have tried it for that matter) - but as for anything else...i'm stumped...provided you haven't changed anything since you have done the previous Lite-On ? You see, if you said you hadn't done one before i'd say well remove all your drives, bios etc etc...but as you have  gigabite |
|
|
|
|
Logged
|
.ISO - he's a wannabe ... feel part of "t3h sc33n" yet ? QQ coming 2009 |
|
|
|
m60_maniac
|
|
« Reply #12 on: February 18, 2009, 09:12:22 PM » |
|
yea ive always used dos, tried jungle for my 1st 1 and i hated it so used dos. havnt changed a thing, apart from a 500gb hdd to a TB hdd but i did about 6 more after that and then the 1 above. dont 4 or 5 more since that too :S
how very strange lol. im thinking it must be the drive some how, bad chip maybe? pulling at straws now lol
|
|
|
|
|
Logged
|
|
|
|
|
gigabite
|
|
« Reply #13 on: February 19, 2009, 05:57:29 AM » |
|
jeeeeez???......my last and only thought is bad solder joint somewhere I mean, no idea - put it this way - at least you can re-flash another drive if need be (as in...it's already working with a BenQ and if you really want, you can grab another Lite-On and flash it if you really must). It's one of those strange things you just can't explain  gigabite |
|
|
|
|
Logged
|
.ISO - he's a wannabe ... feel part of "t3h sc33n" yet ? QQ coming 2009 |
|
|
|
m60_maniac
|
|
« Reply #14 on: February 19, 2009, 06:33:45 AM » |
|
yea thats what i was thinking, something like that somewhere :S ahh well, ive gotta send a console to MS, ill wack that in 1 of them lol thanks for the help mate |
|
|
|
|
Logged
|
|
|
|
Fadern
Newbie
Posts: 1
|
|
« Reply #15 on: May 05, 2009, 05:25:13 AM » |
|
I had the same problem..
The only thing i had to do was to switch SATA cabel from the port on the back of my via-sata card to 1 of the ports on the card.
Now i have port 9000 instead of 9400 and it works like a charm.
Nuked Xbox 360
|
|
|
|
|
Logged
|
|
|
|
|
m60_maniac
|
|
« Reply #16 on: May 05, 2009, 09:36:17 AM » |
|
already tried different ports matey
|
|
|
|
|
Logged
|
|
|
|
360modgod
Newbie
Posts: 1
|
|
« Reply #17 on: September 09, 2009, 11:35:29 AM » |
|
Hey guy's, I had this same problem 3 months ago. I just kept trying the flash process for 3 days, tyring every possible combo I could think of and it eventually worked! I thought it was just an odd ball drive but it happened again today 09-09-09 "wired date, right?" I figured it it out though! When it comes to flashing newer Lite_on drives: USE THE SHORTEST SATA CABLE YOU CAN FIND! It makes the difference. I hope this helps anyone who comes across this problem and is lucky enough to find this page. Good luck to all.
|
|
|
|
|
Logged
|
|
|
|
|
Dilber MC Theme by HarzeM