DVDkey Benq/Liteon key extractor

[Spider85]

There are a few things you can look for.  Make sure the 2 points are bridged, tray half open.  If it still doesn't work then try inverting Rxd and Txd wire,  I had to this with my adapter to get it working.  Use dvdkey 1.2,  you'll get results instantly,  no need to wait for 20 sec

And if the problem stays? is it posible the Rxd and the Txd witin the IC chip are fried? so playing games is still posible (originals ) but we cant read out the key.
Or is it so that if the drives works you can read out the key?


Kind Regards

[xdanx]

There are a few things you can look for.  Make sure the 2 points are bridged, tray half open.  If it still doesn't work then try inverting Rxd and Txd wire,  I had to this with my adapter to get it working.  Use dvdkey 1.2,  you'll get results instantly,  no need to wait for 20 sec

And if the problem stays? is it posible the Rxd and the Txd witin the IC chip are fried? so playing games is still posible (originals ) but we cant read out the key.
Or is it so that if the drives works you can read out the key?


Kind Regards

What errors did you get?

[Spider85]

There are a few things you can look for.  Make sure the 2 points are bridged, tray half open.  If it still doesn't work then try inverting Rxd and Txd wire,  I had to this with my adapter to get it working.  Use dvdkey 1.2,  you'll get results instantly,  no need to wait for 20 sec

And if the problem stays? is it posible the Rxd and the Txd witin the IC chip are fried? so playing games is still posible (originals ) but we cant read out the key.
Or is it so that if the drives works you can read out the key?


Kind Regards

What errors did you get?

The following error:

It didn't work, sorry       sega: 54
Nothing received from COM port


I have made a loop between tx and rx and there is a repeat in the terminal so the adaptor is working.
Besides i have followed every step in the tut, tried it under DOS, under windows but always the same error.
after switching rx and tx same prob.


Kind Regards

[welly_59]

using right com port?

[Spider85]

Yep, hardcode port 1 on 0x3F8 IRQ4, and in the windows version i have tried 1 and 2 but no luck


Kind Regards,

[RoyalCS]

hi, how long did the hole process of generating the 3 files take?
In my case I  get a DVD key.bin but none of the other files.

The last lines are:

Seems a GOOD DVD Key!!!!
KEY.BIN saved

PLDS      DG-16D2S       754...

then nothing happens. any ideas?

[xdanx]

Yep, hardcode port 1 on 0x3F8 IRQ4, and in the windows version i have tried 1 and 2 but no luck


Kind Regards,

Read post #412.  give it a try and see if that works.  You can use power from the xbox if you don't have a connectivity kit, but don't power off the xbox,  unplug the power cable from the back of the liteon drive. (becareful not to insert the power cable in the wrong way, it'll zap and burn your fingers)

[Spider85]

Yep, hardcode port 1 on 0x3F8 IRQ4, and in the windows version i have tried 1 and 2 but no luck


Kind Regards,

Read post #412.  give it a try and see if that works.  You can use power from the xbox if you don't have a connectivity kit, but don't power off the xbox,  unplug the power cable from the back of the liteon drive. (becareful not to insert the power cable in the wrong way, it'll zap and burn your fingers)

I already tried the switch it but no luck

Regards,

[xboxchan]

any other ideas?  i have tried this several times and still Nothing received from COM port....


 

Can anyone give some ideas for this:

It didn't work, sorry       sega: 54
Nothing received from COM port

Did you connect rx from serial adapter to rx of the drive and tx to tx ? You probably have to invert those wires (tx->rx, rx->tx), give it a try.

[endorium]

i have the same problem as a couple of other people and i have the same circuit as the rest. it is this on:
http://cgi.ebay.com/MAX3232-RS232-to-TTL-module-converter-AVR-PIC-ARM_W0QQitemZ130253561070QQihZ003QQcategoryZ4660QQtcZphotoQQcmdZViewItemQQ_trksidZp1742.m153.l1262


it has 3 jumpers on it which i am sure it has something to do with this error:

It didn't work, sorry       sega: 54
Nothing received from COM port


can someone please help as everything is soldered correct. i have tried switching rx and tx. tried everything else but not messed with the jumpers on the board. Please any help?  Also if i try dvdkey32 i double click the program and a box appears and disappears again before i can read anything?

[Spider85]

Also if i try dvdkey32 i double click the program and a box appears and disappears again before i can read anything?

You must start it in the CMD screen so go to

Start --> Run type here CMD en push enter
A black screen is showing now.
Type in it cd "x:\dvdkey32" where x is the drive letter, and without quotes off course  and push enter.
and then you can type "dvdkey32 CMB CB COM"

Kind Regards,

[coyotex]

sorry for english... i have the same problem...... i resolved.. open the drive manualy, power on 360 push eject two times, the drive is closeing, unplug the power (drive), the led is flash.... plug again the power (dont power off 360), run dvdkey 1.2

it`s woks

any other ideas?  i have tried this several times and still Nothing received from COM port....


 

Can anyone give some ideas for this:

It didn't work, sorry       sega: 54
Nothing received from COM port

Did you connect rx from serial adapter to rx of the drive and tx to tx ? You probably have to invert those wires (tx->rx, rx->tx), give it a try.

[RoyalCS]

@ spider85
hi, I dont get this "Nothing received from COM port" message even if I dont connect anything to my com port. So there must be something wrong with your com port configuration.... or mine 

@all
dvdkey gives me this:


and than nothing happens for a long time... (the last line takes about 5 minutes to appear, is this normal?)

anybody?

[endorium]

everyone keeps saying to use paperclip to manually open drive. i have my drive open now and sodlered. where should i be pushing on lite on drive to manually open it?

[habibtomb]

hi everybody,

i have a problem,when i try to connect to www.xbins.org i just can't enter the web site,
i don't know why ?
anyone plz can help me to solve this problem? coz i wanna download the dvdkey 1.2 and i didn' found where to download it!!
and if can anyone plz post it here or grab the link to download it!

thank u !

[endorium]

how do i test if my rs232 connector is working? i know it has something to do with hyper terminal.Also could it be the reason i am getting these errors is something to do with com port settings? I have an asus motherboard if any one could help me with what settings i should be using.

[notherbastard]

http://forums.xbox-scene.com/index.php?showtopic=642129

this will fix your xbins problem

[habibtomb]

yes , thank u notherbastard ! everything is allright!

thank u again budy!!

[benny881]

Hello guys, i'm italian..so sorry for my bad english..
I have a problem: i don't know which chip max3232 i have to buy in order to extract the key of my liteon...I don't know if i have to buy a 3volt or a 5volt...
Please can you tell me if this http://cgi.ebay.it/INTERFACCIA-RS232-TTL-3V-rs-232-max3232-MONTATO-V24_W0QQitemZ190250515145QQcmdZViewItem?hash=item190250515145&_trkparms=72%3A1025%7C39%3A1%7C66%3A2%7C65%3A12%7C240%3A1318&_trksid=p3286.c0.m14 will work good??

Thanks

[xboxchan]

I don’t get it.  I have tried very combination of rx to tx and rx to rx and tx to tx and still no com port.  I guess my com port does not communicate in dos mode. 

I’m starting to wonder if this method even works.  I guess it does based on the response from the peps, but my PC will not communicate with my com port 1 in dos mode!!!