I am sure it’s real. It’s just a dual firmware mod and a dumb one to considering the glue that’s all over the flash chip that’s not so easily removed.

Yes they have to be on DL dvd's. The hack requires a perfect 1:1 backup, so there will be a large amount of dummy space making it over 6 gigs.

I think thats okay, what do you other mod's think?

Security Sectors do contain copyrighted material, so any bytes taken from them would still be illegal. So any sharing of a few bytes would not be okay and program that creates security sectors would not be allowed on this site. Checksum/md5 would be okay, but any sharing of Security Sectors would not be allowed.

TSS, sorry I did not notice you said anything I tend to ignore some messages/topics that don't require support or awnsers to questions. You can upload it, I don't see any problem in comparing a SS you made yourself via a checksum or MD5 to make sure you don't waste a expensive DL disc.

Crossing the wires for any amount of time could potentially kill the drive. Its not safe no matter how long you hold the wires.

The samsung firmware doesn't need to be encrypted before flashing with mtkflash.

Yep, sounds about right. Make sure you have the proper or it will not work currectly.

Don't ask for files in this forum!

You can do the flash over the old one, read every word carefully. If you see failed anywhere, do it again and again till you don't see failed anywhere.

Sounds like a bad flash or damage from the crosswire method. Try flashing it again and see if that straightens it out.

Sounds like you fried the drive, if you read around the forums your not the only one. Should have never attempted this method in first place..

Sounds like your floppy is at fault, follow the recovery method with a new floppy.

SailorM, they may have a e-mail system but they don't use it. You will never get a answer, if you do I would be surprised. Call them a few times till you get a straight answer out of them if possible. Their closed now till Monday but call them Monday morning and see what the deal is.

Ahh xbox 1 didn't see that, I thought you ment the xbox 360 hitachi, they are the same. I am not sure about the xbox 1, atleast we know now.

Don't panic, I bet you just had a bad flash. Follow the bad flash recovery in this tutorial.
http://dwl.xbox-scene.com/tutorial/xbox360firmwaretutorialv32Sam.pdf

Also PM me so I can help you more in depth. Click the blue circle to left of this messege with the text IM in it, and send me a messege.

I said to use KDX 1.5, and paste your key into the same firmware as you edited before. Because KDX will only work after certian changes are made. And those changes were made when you hex edited your buddys key into that firmware. Read carefully!

About this error, did you press the button on the xectuer kit like I told you not to before?
Also whats the error number?

They are the exact same. Just swap the little piece that connects to the motor. There’s one screw on the bottom of the laser.

Just use kdx 1.5, and open the firmware with you buddies key in it and paste your key into that. It will work flawlessly. You can't brick a Samsung unless you plug the power cable in backwards or something dumb. You can always reflash no matter what so don't worry about it.

Make sure you backup your firmware first in a few safe places, so you don't lose your key!

Edit: Also try posting in already made topics. I can find your questions just as easy if you post in your previous topic.

Thanks

Yes, use ss merger to merge your SS file in. Then burn the .dvd file with clonecd.