Hi There
I Need a Donor Nand for my Falcon Retail v3.0 with CB 5771 and Dashboard v 13604. I've got already a Donor Nand but the Dashboard is v 13599, so i can't use it! I have the KV, etc of my old nand. Could someone post a link or send me a PM?
Thanks Shad0wbreaker

Did this already around 10 times... Tried one more time, still don't work... Could it be the Glitch chip? I use a x360Glitch...

Good Morning everybody
i've got a problem. I wanted to update my Glitch hacked Xbox to the newest version. I wrote the updated Nand to The xbox and i didn't boot after restarting it. So i wrote the original Nand back on it, flashed Xell on it, rebooted. The Xbox booted but there was no image. No the Xbox is recieving the reset (fan-speed changes) but don't boot.
During the flashing i've got something strange:
When i dumped the nand for the first time, i had a bad block on 00C. I had to fix the bad Block and xell started. Then i installed Freeboot with a usb stick. Then like explained (around 6 weeks later) i wanted to update the box to the newest dash. It didn't update correctly so i reflashed the original nand on it. BUT there weren't a bad block in writing. i am confused... What can i do to get my xbox working again?
Shad0wbreaker

Hey,
i have quite the same problem, it would be nice if someone could help me. My Problem is, i broke the trace (Jeah, i know, i am an idiot). The Trace is broken after the resistor, the resistor is blown. i removed the resistor and wired the part before the resistor, took a new resistor, soldered it and soldered the wire after the broken trace. My Console is still not working. Somebody can help me?
Shad0wbreaker

Ok, i fixed the CLK line following that guide (http://www.xboxhacker.org/index.php?topic=17051.msg127522;topicseen#msg127522). all Connections are soldered good, not perfect, but at least as good as in the guide. The Xbox still doesn't boot... I'll upload some fotos soon (have to recharge the Accu )
Shad0w

Jeah thanks i saw it this morning, the trace is broken. I'm gonna try to fix it. There is a good tutorial in this forum.
thx Shad0wbreaker

I resoldered the connections and now, i cant even start the xbox WTF???

Hello
I've got a big problem. Long time ago, the dvd drive of my Xbox 360 got f***ed up. I don't know how it happend, but thats not my problem. I found the glitch hack 3 monthes ago, and i knew, with a jtag you can recover your DVD-Key. So i began to buy everything is needed. The Matrix Nand Flasher, the Coolrunner (I bought the one from x360glitch.com, very nice product. Cheap and you don't have to buy the diodes, resistors, etc.) I followed the guide on x360glitch.com, wired up everything. Dumped my Nand (got an error 204, but i read, it won't change anything (the dumping process didn't stop)). I got the ecc file from python and wrote it back on the nand of the Xbox. Now, my problem: The XBox doesn't Start! First the green light in the middle just blinked... then i realised i didn't plug in my DVD Drive. So i Pluged (?) it in (The sata Cable isn't connected, may this be the problem?). I didn't Blink anymore, no... it just lights my Angry Face with green light! I am so f***ing Mad! Someone's got a solution? I double check the Solderings now... And if it won't work i will kick that xboxes ass!

Sorry for my bad english

Shad0wbreaker

Ok... i put the new laser in... everything's ok, portal 2 and original games are still working... no i tried a game that didn't work and BAAAM i Got, (like expected) unrecogniced Disk! The games i try to play are ap25 ... could it be that my old drive can't read them?

Thank you very much! i will remove the solder with a solder sucker (does it is called so?)... it should work. i have read somewhere, your laser can get weak during flashing, for preventing this, you can remove the connection between the PCB and the Laser... can someone tell me if this works? i have no idea if you can flash it with the laser disconnected

Thx to everybody! i think i will buy a new laser from ebay... these things are only 4.50 £ shipping free... I think i will post the result and the replacement with some Photos... I will also research for preventing the weak laser 

Thanks again

Aight, and if i have the drive, i can flash it with my key (i safed it on a CD)... But do someone where is the best place to get the drive?
And i have another question: Why does Portal 2 work?

I 've found a tutorial to fix it, but it didn't work for me (maybe i made mistakes, i didn't understand everything clearly, maybe someone which understood can tell me how):
http://www.youtube.com/watch?v=iOmNtrStDgM

The Laser of the other Drive is also weak  Bullsh**

Mhmm i got another Drive, but i don't know if the Laser is Working well... Do you think i can try to use the laser of the other drive? I could flash the other Drive, but i don't get it in Mode B... (The Other went to mode B in 10 second with the same options, usw.)

Hello Guys

First: Sorry for my (probably) bad english, i am swiss-german and jeah, i don't speak english for a long time.

So, I've got a problem: I've got an Xbox 360 with flashed Hitachi Drive witch is spoofed as a Lite-On 74.. So now, when i put in a burned Backup it shows me the message: unrecogniced Disc, disc ureadable. But there is one thing: I Got several Original games, and they do all work, and there is also one Backup which is working (it's Portal 2). So my Question is, how can i fix the unrecogniced Disc?

I am desparated, i searched on Google, Youtube, i asked some friends, and i also looked here, but maybe i am searching the wrong thing? I Don't know, so i thought: Why do not Post, so this is my first Post

All the DVD's are verbatim DVD+R DL 8.5 GB, some burned with ImgBurn, some with CloneCD (Portal 2 burned with CloneCD) burned with the DVD Burned which came with my Tower (it's a Atapi-DVD-Burner) is something wrong with my equipment 

I also installed for example my Modern Warfare 2 Disc to the HDD, and then tried to play it, but there were also a "Disc unrecogniced" Error 

So, Thank you very Much for helping me!

Thank you Guys! 

Shad0wbreaker

P.S.: And for the admin who has wroten the topic at the beginning of this Forum: I am sorry if i posted this to the wrong place or rewrote the same question (I searched, i swear!)