Good luck,

360sexual!!!

Haha yes(stupid of me) i now i know what i did wrong, it is working now and i dump it 3 times.

Thanx!!!!!!!!!

Use dosflash16 (ms-dos) to dump and flash your key and spoof it in JF.

Thanks Arakon for the fast reply, but i also put that in the flash. I used the xell-1f or must i use xell-2f?

Thanx.

Gazcoigne is right, i also do it on the old way. Only the dump I do with the maximus USB Xtractor and spoof it in JF. After that i use L-O-ERAS and flash it in dosflash (ms-dos) that always works.

Dosflash is also easy to read the new lite-on 93450 driver (after a some solder in the driver) I did already 3.

Good luck!!!!

Hi all jtaggers, 

This is my story, I boot up in XELL and i have my CPU key (dvd i knew already). But i don't get the httpd on screen.  The network cable is connected. It is a Jasper 512mb board.

Is there something i am doing wrong.

Thanks.

Regards,

Brooy.

Hi All,

I think I have a big problem with the solder of this diagram. http://i12.photobucket.com/albums/a246/Grim187/jtagwires.jpg

It is the rightcable all went well and than i picked the motherboard up to put it in the case and the cable went off. Not on the side off the diode but the small solderpoint on the board. Now there is no point anymore to solder.   What can i do now? Is there somewhere else to solder the cable?

I hope somebody can help me.

Thank you!!!!

Rgds,

Dimitri.

Thanx Jelle,

I saw this also but I was not sure this was the right way, but now say it to me to do it like this than I will try it. 

Okay perfect, but what is the best way?

Is this the right way?

nandpro orig.bin: -r70 rawkv.bin 1 1
nandpro orig.bin: -r70 rawconfig.bin ef7 2

And then,

nandpro XBR.bin: -w70 rawkv.bin 1 1
nandpro XBR.bin: -w70 rawconfig.bin ef7 2

And to flash,

nandpro lpt: -w70 xbr.bin

Hi all XboX Brewers,

First off all this is realy a great forum!!!!!!!!

A did already homebrew 3 XenonBoards XboX's with no problems. 

I have a few questions about the homebrewing a Jasper Arcade 512mb.

I made 6 dumps the first dump the whole 512mb and than after 5 times with the -r70 with Nandpro.

After that I compare it in HexEditor and the dumps(r70 dumps) they are all the same and I change the second year of 2008 to 2005.

Is it safe to flash it now?

Did I do it good for now?


Thank you?

So, here i am again. So i found a old Xbox and i homebrew it myslef. 
Thank you all for the feedback. I learn a lot in a short time.

Thanx Summary,

Yes it's flashed(lite-on), I do that my self because i that's what i i do for extra money i even flash the 93450 lite-on wiht the Ixtreme 1.61. 

So that is what the dvd file is doing, that is a good lesson for me.

So i will try to do it with Imgburn i hope it's working.

Thanks everone!!!!

thank you parasven,

I just try it with nero, so i go to burn data disc. I add my renamed folder (default.xex) and i burn it.

But my XboX says it is multi media disc. Aaaargh.

And i know if i know it, it's gonna be very easy.

Thanx Arakon,

But how do i slap it on dvd or cd? (maybe a stuppid question).

Thanx.

Hi everyone,

I am new overhere and by reading a view xexloader topics i have 1 question.

I burn many Xbox360 games before so burning is not the problem, but i know when i only burn the ISO file my xbox can't read it. It says that the disc must be cleaned (i knew this already before that was gonna happen). 

When I burning games i have the dvd-image(always 1kb) and that's working perfect. 

So how can i make a dvd patch for the iso file?

Thank you.

Rgds,

Brooy.