Can someone help how to inject xellous into freeboot image? Do I still need xell or how it goes? Is this file correct xell-2f.bin?

Example this?
nandpro updflash.bin: +W16 xell-2f.bin 30

or does it need something else? And then you need rgb video connector and xellous can be started with eject? Just wanted to be sure before injecting.

Thanks

Great job cory1492! Thanks for app!

And thanks to everyone who helped to solve this issue. Thats why I like this scene. People are willing to help each others regardless of time they spend on other people's problems.

I will try to create nand image with FreeBOOT Toolbox 0.04, run FixJaspa and then flash with Flash360. I will report results later.

Artik: Youd should use fixJaspa.

Exactly same.
Jasper 16a and CB is 6723.
Southbrigde version is 2.3
Bad block at 27D.

Ok, finally it works!

What we did was:
- Dumped orginal dump into console. Startet it couple of times. Everything was ok.
- Dumped dump from nand.
- Extracted kv and config with nandpro
- Fixed real bad block with bad block remapper
- Flashed with new jasper 3a file and dumped. Rereaded and dump was identical.

Then it started work. I don't know what went differently than last time. I want to thank you all people who helped me with this. And of course Hitec who finally got this work for me. Thanks to Geremia for this new sb version!

Xell is working perfectly. I managed to get CPU key. So it can't be about bad jtag hack. Is that bad block mover working corretly with new version of jasper dump?[color=][/color][color=][/color]

Thanks for your reply.

I forgot to mention that i had used both ways. With and without config.

Hi,

I have Jasper 16M version and dated on 2009/02/04.

I have all following conditions true:
- original.bin: 0x71=01
- kv.bin: 0x200 = 00 01 00
- Flash tool 0.90 shows file list incorrectly
- Bad block remover shows bad block at 0x7D00 instead of correct one 0x27D

Bad block remover shows log below. Is that correct with new SB?

== Analyzed successfully ===========================
Erasing 0x20 Spare Blocks at offset 0x00FFC000
Reading Block ID 0x027D at offset 0x00A43A00
Copying Block ID 0x027D at offset 0x0107BE00
Zeroing Block ID 0x027D at offset 0x00A43A00
== Remapped successfully ===========================

I had no luck with any released xbreboot so far. Used infectus to flash nand. Xell works fine with XBR_Jasper_16_8955, but dashboard gives only E79. All dumps are done by injecting with nandpro20b.

For test I created new dumbs with following settings:
nandpro orig.bin: -r16 rkv.bin 1 1
nandpro xbr.bin: -w16 rkv.bin 1 1

as xbr_nanpro.bin

and with BinCrypt2 Build 28:
extraction:
  raw Flash bin - > extract - (operation: nothing) - > key vault (from orig.bin to kv.bin)

and replace:
  raw Flash bin -> replace - (operation: nothing)  -> key vault (from kv.bin to xbrbin)
as  xbr_bincrypt.bin

Then used NandComparer v1.2 to compare those dumps. And result is here:
1 non-matching block(s) found 1

So my next step is use that xbr_bincrypt.bin with lpt. Has anyone had similar problems or is there something iam doing wrong? I read somewhere that bincrypt solved problems.