yes i even pm-ed you...is this just a put on to up our thoughts of wanting this and you 'push the f***-u button'?...lol
i mean i don't want to assemble the freaking thing..I just want the stuff as is.

i see as in here,
LAN Key
  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

either it needed a validated machine or you 360's port wasn't configured for this?

so the hare is the 360 and relient_k is the turtle ...lol

anyways, yes messed up errors but succeeded in geting it back up...

lmfao Pacote-san ,relient_k tried to google "pussy whipped" an no results...lol

or just try autohacker to read it and show what CB it is....

well now you did it...so now your pirating backups as you stated from a friend
maybe you better hope your pirating ass over to xbox-scene and ask them why your waves don't work...
your prob running a Hitachi drive and have to up the laser..
thats all the answer your going to get from me,freakin pirate.TPB=ThePirateBay...f***nutt...
not to mention you paid no attention to Gazcoigne's post on hints of what the issue could be...so go f*** a goat...

xXhighpowerXx,
awesome work on it...
it helped out in many ways
it be nice if it knew the kv formats (kind of like a main boarder) so when you re-save the kv it corrects misc stuff within it as noise corruption ect.....

thanks...

good deal on your box working...and yes this was a rather weird project but in the end worked well...
so now we know 1022 can not only be hardware related but software related

yes that is an awesome kv reader for a messed up nand.....i see it reads it different and gives some leway

well needed...but isnt going to cure the issue of the kv to get the box up.....
in his kv under offset 00F0 instead of all 00 00 there is a F1 in which all my nand kv i have gathered ,none show this
most are ntsc and or pal but only region 1 ,his is region 4...
so when i change this all it does is corrupt the manufacture date in 360flashtool so him being not from usa i am thinking mabey the format has to be changed in the kv to get it up and running..
we though that it becomming a CB of 6723 would be a issue but i have many jaspers with that CB ....
it all comes back to the kv...i can't try this because none of his orig nand copy's are readable for me to sneak my kv in them to check his nand info on one of my boxes...even a donor nand fully working with his kv don't boot.....
so this is how i came about the KV issue...

unless the game is patched for a different wave...all you can do is hook up the lpt to read the nand and then check the CD info....
search in this forum ...all your answers are here.....

as Arakon said this ios just a temp cure...also it will fail and prob cause bigger problems with the mosfets.....
if your in the states pm me if you can't get it done...
what your board is doing is warping pretty soon the gpu will fail or just warp at the ends....

good deal...glad it worked out for you

360FlashTool 0.94..now was that hard?

what you can try to do...E74 can also be the eDRAM on the gpu over heating on the spot....try to put a piece of thermal pad on that eDRAM chip only then put the gpu back on as it was...the eDram is just a tad lower then the GPU chip itself...this is why m$ had the heavy drying thermal paste/pad in it also..(suprised no one ever brought this important issue up around here).lol
also check it it degraded for bad blocks on a re-read..
this is also why 1022 would occur on this type of issue...and don't get mixed up on e1022 of this type off error,it's not E1022 is a range error of what it could be...

but you stating this in your post,
How exactly would I go about doing that?

makes me even wonder why i chimed in, and posted

as of now freeboot is in affect.......
xbr was just a temp stand in because of freeboot when it first came out ,can only work with 2 nands...
now that freeboot works with 1 nand ,what would you think?

Reply #4 on: December 25, 2009, 08:37:51 PM was the last post..i am sure it's morethen fixed....
damm noobs ,bring up way old posts...

start searching and hellp yourself......mabe a reflow?

maybe durning screening the card wasn't fully setup...and live meaning testing the card live for workability
be nice to have a copy of that card to see what it's looking for...
do you have a MU reader to copy it to the pc?

stock 360 ? and it might not handle that memory card as stated by xbox.com...
judging by the error, it can't get the cards info to connect to it...
what memory card is it?
what dash is on it?
is the box ban or live?

also the south bridge version.....
I do think your question is answered...

memory change(or a falcon with top memory only) and maybe a southbridge change.....along with the nand info from the falcon or just the nand...
and you can't make your jasper exploitable but you can make the new falcon exploitable.....

also the parts that belong to the falcon around the CPU and GPU might need to be changed on the jasper board....

now to you it might be worth it...but runing a good jasper board is stupid...but it's your thing
good luck...
P.S quit asking and start working step by step...remember your good at doing this as you stated...

try using a search....
no

well the ROL board might be the problem also(just a fluke)..i have and had many go bad..
some even good on 1 unit and had to unplug on another unit for the dvd drive to work at all, or for the unit to turn on,
and both where the same model ROL boards, (so this relays more info then we think)..
but it can also show signs of switching the controller light(laying down or standing up lights) and not relaying back to the switch some other info because of the switch not completing the circuit...
the part i am stuck at is,what would the dvd drive have to do with the switching ,itself,
because the drive will read both ways without a switch(tilt either way)..it shouldn't really matter to the drive,
but you never know..(does the rol board look for a dvd drive first? and then do it cycle? I think it does...