well if that's your second X360 on the same power supplied to it,
I would check you source of input....I seen grounds in a house/APT giving off low voltage...

making wanna convert to ps3...
no comment on that bull$#!t statement, as your in a 360 section..
the help stops here from me because you just stated that...

you answered your own question.
falcon jtag cpu to jasper mobo swap

think about it, 175wat to 150watt.
some 16mb jasper cpus you can get away with....

besides what Gazcoigne said,
keep it unplugged for some hours..
check the psu end and check the video pins.
also for the hell of it try with the controller.
also a different power socket.

pretty strange from just moving it,but it happens.
i had a couple of units that were hot when i moved them ,and just the move caused a cold solder joint...
 

kookoosan wrote,
also checked with degrader...


Did you put the date back when you changed it...
it won't boot because of this even after a XBR or Freeboot compile

you did search before you posted right.....
ya right ...search and then come back and post your results....
anytime you hook to live it dl's the list and flashes it to your nand...

i have tried this and to make a long story short
some how after running XBR_3 flawless for 3 days and switching to freeboot i can never go back..lol
because nothing works and nothing on the board is shorted out..
so only other thing is somehow the nand is corrupted and not resetting....
make sure before you write XBR to erase the 1000 and up blocks the write to it...(worked for another 3 days)..
that gave me a 1.5 week timeline to find something that happen along the way...(i am at at this point now so i will update).
it be nice if a hardware member would come in and show a hw reset..
P.S they said it can't be done and it was but only lasted 6 days tops...
but i still have all 3 read and compiled copys that were reflashed to it and worked for that day.
I think maybe my next option is to install the XD card slot to make sure it's the nand..
or 6712 and 6723 can't be changed for hw ldv values...(maybe because of the MU section?)
don't know....

that unit alone, re-check for your bad block relocation and make sure it's placed within the 64mb's (system).
or major corruption......

don't jump to much..
 it could be a trace coming off the SB,it has a cold solder going to the GPU.
pushing on that spot makes the board flex so..
might want to reflow that area over the nand and gpu well your at it.

the only way your kv is going to go public is if you give it out..
2 WAYS TO POST THIS $#!t
1) you sell it...
2) your scared, because your modded and go online....

only reason why i say that is because over 30 f***ing % give it out..
really dudes? is it really worth it?
 

dudes ,
please, when your stopping by for info sucking up the knowledge
use the freaking search...
and quit thinking your posting in the right section(your not)
start out at the home page...the search works better on there...
just a wise hint...
Peace!

You could be right but think about this,
a man at his level don't need to worry about anyone's bs, and i am sure he don't.

it's not just about hacking...it's about how far you can go with devices that stump most of the world...
then when you succeed at your task,it gets boring and you move on to the next device, to close the parts in your brain,
that just stump you to death on finding out why...

He made the first steps to hack 360 and when it arrived to (Rebooting) he was afraid of privacy and from legal issues from M$.

not even
as long as you don't sell anything, your good to go on studying anything for your sake.
it's called a 'white paper study'...

jowadmax maybe he will pop in and you can shake his hand
I would...

I don't know what your smoking but ...look here 7320 dash???
[Kernals]

lmfao ..he is right there are other things to hack...so leave him be..
this is why most don't admit what they do...

sorry guys...2 things...

1)due to the original image not being fully there or corrupt can cause this.
2) the region can't be altered from pal to ntsc or ntsc to pal due to hardware checks?
i have tried many things so far and the out come came to the bad fact of the orig nand,
 is corrupted somewhere within it, even though it can be read within the programs we use...


SIDE NOTE...maybe our block corruption stops this or some kind of lock out or mis replace to another block..(might be new)

the bad part...1 month on and off checking for cures lead me only to the famous Christmas lights or just blinking or steady green light
then ROL 0022

the good part is i have 1 unit a 512bb that i have been devoting to this future cure...
i am almost sure the smc maybe might be the problem???
so going off what's our first file in the nand at boot up(checking or running)
sorry this has me stumped but i do have a gasp on it,so if i find something new, i will post...

just a thought...
can a program be built to check for basic stuff within the nand(image) to make sure it's not corrupt,
as in what do all these units have in common within the start up(within the nand) to check to make sure it's non-corrupt...
remember this is just a thought...


P.S Gazcoigne,
can you patch in all the info for the 6bl and 7bl to match the orig?
i myself have never tried that but might ...
or maybe our LDV value got corrupted and changed the value..I have seen this happen on a read...
(try changing the 6bl LDV value to 2 just to see what happens).
I do hope the big dogs respond to this little problem..lol
  

got it....thanks and can this be trashed now

Thanks cory1492..
that's what i get for staying up all night and then posting...lol
fixed

does anyone have a  7363 nand dump they want to give up?
don't know why anyone would have it, but it's worth a try




as you know it's not jtaggable i just need it for info....
peace....

I sure hope you guys sing as good as you whine about this crap...lmfao

anyways i will be listening for the dogs howling at night....

ya Gazcoigne check your pm's...lol

Unbelievable!...lol