lmfao ...ok thanks....

no offense against the pig but
freeboot toolbox 2.4 and all the versions are not stable with different units...
as stated in the past..
most that are into the inters of doing this know it's not stable

as for your corrupted profile?
was it from a ban unit?(8955)?
and does the dvd load wave 6?

no worries for that...i wasn't thinking that....sorry...
now lets get the testing going...lol

i hear you jokerbrazil,
I do many nands per day.....


Just a note:
as i go on i also notice the files made by 360flashtool or freeboot makers, just a couple of bytes in the decrypted files are altered..
just throwing this out on the board....

well that was kinda of worthless that you posted then ZerOneX...we have been through this...
then you posted this...
Here for me appeared 100% ok.
I didn´t write this nand on my 360, I just did this for testing purpose, use it at your own risk.

please don't post unless you actually tried the mod. no offense though ...
we had enough if's,but's and maybes...we need hands on .....
we already been to the confirmed part showing in writing it would work and hasn't...

any jasper 256-512 need detailed time into them...out of around 50 of them i did 27 of them were being hard to do....

BadBlockMover_Beta_10 works with checking bad blocks relocating bad blocks and injecting the kv and config into a fresh untouched copy of xbr
and you shouldn't be so quick on the draw..see where it got you...
cpu key is important....

needs to be moved to a different section...this isn't a mod....

needs to be moved to tech support...

this needs to be moved to tech support...

did you inject xell/xellous and grab your key? this should be done way before installing xbr or freeboot?
and did you use badblockmover to load the orig nand to relocate the bad injected into XBR?(easy way)..
or manually move the bad blocks...exact steps on what you did to cure the bad block thing would be great to know...

wrong section...this belongs in tech support....
and to clear this up your using your orig read nand? a rebuilt orig nand? or xbr?

wow ya no need for distortion on that kind of level...

and as stated in your link
each game needs an emulation profile to run through live only.....and as we know even the liget box won't do ntsc to pal or pal to ntsc or even load some games for that matter...
but the list did get bigger...
now for the hard part...how do we get these files? i take it there almost like game titles but on the other hand it shows you have to be hooked onto live to achieve this,which means that our units sends a check for game on list then when it's valid it sends back a ok for the games to run in emulation mode(sending back the right one for each game)....so i think that this is a no go for now....

sure glad i have my fully modded xbox1 for now to keep the older likable games going.....

sent ya a compiled xbr ...check it and let me know...

cory1492, whats the difference between your version and this version?
http://www.xboxhacker.org/index.php?topic=6752.0
and is the command
sbtool x <decrypted file> <flash image>
because in your usage page ,it can't just do a

sbtool x orig.bin nand as shown in your usage just running sbtool.exe without nothing..

well i rebuilt him a nand has the same dashes and LDV values..
I just used 360flashtool to copy over the encrypted kv and config...
but as said the pairing data is different...so now we will take it from there
without keys....
your nands pairing data is 0xA9F867.
the patched nands pairing data 0x131096.
what controls the changing of pairing data? smc?
and can't whatever file be extracted to solve this issue(without a key) in nandpro to change the pairing data?

i try with a cb 6750 but with CF 7357 and dont get boot either...


even with a donor...we still have a issue with the correct LDV values......
remember the order of the lockdown values wont be the same on all consoles....
and you tring that 7357 dash calls for a Efuse blown so you need to up the LDV value by 1 you can't go backwards..7363 to 7357

yes but just like a pc's memory ,won't it draw what it needs? while working?

you sure that's XBR with a 9199 dash?
looks like freeboot (9199 dash)